半导光纤体脉冲功率自动控制系统设计

发布时间：2018-08-21 13:10

【摘要】：传统方法中采用直接调制半导光纤体产生的脉冲信号进行通信信号加强,半导光纤体产生脉冲开关接近于高斯分布,带有一定量的干扰,影响通信信号质量。为此,提出半导光纤体脉冲功率自动控制系统的设计方法,通过利用半导光纤体进行通信的虚拟线路构建优化编码,实现虚拟线路代替终端硬件,使通信数据在通信中完整传输,半导光纤体脉冲功率自动控制系统控制的通信网络能够去除信号干扰。在仿真实验中检测了通信的数据传输时间、数据传输稳定性和数据传输过程中的抗干扰等性能。结果表明,半导光纤体脉冲功率自动控制系统通信数据传输完整,稳定性和抗干扰性都优于传统方法,能够解决传统方法的弊端。
[Abstract]:In the traditional method, the pulse signal generated by the direct modulation of the semiconductors is used to enhance the communication signal. The pulse switch generated by the semiconducting light is close to the Gao Si distribution and has a certain amount of interference, which affects the quality of the communication signal. In this paper, a design method of automatic control system for pulse power of semiconducting light body is proposed. By using the semi-guided light body to construct the optimized coding for the virtual circuit of communication, the virtual line can replace the terminal hardware. The communication network controlled by the automatic control system of semiconducting light body pulse power can remove the signal interference. In the simulation experiment, the data transmission time, the stability of data transmission and the performance of anti-interference in the process of data transmission are tested. The results show that the communication data transmission is complete, the stability and anti-interference are better than the traditional methods, and the disadvantages of the traditional methods can be solved.
【作者单位】：南通开放大学开放教育学院;
【基金】：陕西教育厅科技基金(2013JK1012) 陕西省科技计划自然基金(2013JQ4038)
【分类号】：TN929.11;TP273

【相似文献】