西周时期周原地区的周原出土周原镀锡技术及文化意义
发布时间：2019-03-21 19:47
【摘要】：通过对陕西孔头沟遗址宋家墓地与周原遗址姚家墓地出土的4件镀锡青铜器的分析,发现该批样品均为热镀锡工艺所成,镀锡层厚度在15~36μm之间,镀锡层主要为δ、(α+δ)+δ组织。在此基础上,通过对以往中国古代镀锡铜器分析数据的梳理对比,发现中国古代青铜铜器表面镀锡技术自西周早中期开始出现直到东汉早期,陕甘宁地区镀锡制品年代最早,巴蜀文化区、古滇文化区以及北方毛庆沟等地相对较晚。陕甘宁、巴蜀、古滇地区技术熟练,镀锡处理工艺具有当地特色。本文认识或可有助于中国半月形文化传播带青铜器镀锡技术的深入研究。
[Abstract]:Based on the analysis of four pieces of tin plating bronzes unearthed in Songjia cemetery of Kongtougou site in Shaanxi Province and Yao Jia cemetery of Zhou Yuan site, it is found that the samples are all made of hot tin plating process. The thickness of tin plating layer is between 15 ~ 36 渭 m, and the tin plating layer is mainly 未, and the thickness of tin plating layer is between 15 渭 m and 36 渭 m. (伪 未) 未 structure. On the basis of the analysis and comparison of the data of tin plating in ancient China, it is found that the tin plating technology on the surface of bronze ware in ancient China began from the early and middle Zhou Dynasty to the early Eastern Han Dynasty, and the tin plating age in Shaanxi-Gansu-Ningxia area was the earliest, and that of tin plating in Shaanxi-Gansu-Ningxia area was the earliest. Bashu cultural area, ancient Yunnan cultural area and northern Mao Qinggou and other places are relatively late. Shaanxi-Gansu-Ningxia, Bashu, ancient Yunnan area skilled, tin plating process with local characteristics. This paper may be helpful to the in-depth study of tin plating technology with bronze ware in the transmission of Chinese semilunar culture.
【作者单位】： 北京大学考古文博学院;山西省考古研究院;
【分类号】：K876.41
，
本文编号：2445264
[Abstract]:Based on the analysis of four pieces of tin plating bronzes unearthed in Songjia cemetery of Kongtougou site in Shaanxi Province and Yao Jia cemetery of Zhou Yuan site, it is found that the samples are all made of hot tin plating process. The thickness of tin plating layer is between 15 ~ 36 渭 m, and the tin plating layer is mainly 未, and the thickness of tin plating layer is between 15 渭 m and 36 渭 m. (伪 未) 未 structure. On the basis of the analysis and comparison of the data of tin plating in ancient China, it is found that the tin plating technology on the surface of bronze ware in ancient China began from the early and middle Zhou Dynasty to the early Eastern Han Dynasty, and the tin plating age in Shaanxi-Gansu-Ningxia area was the earliest, and that of tin plating in Shaanxi-Gansu-Ningxia area was the earliest. Bashu cultural area, ancient Yunnan cultural area and northern Mao Qinggou and other places are relatively late. Shaanxi-Gansu-Ningxia, Bashu, ancient Yunnan area skilled, tin plating process with local characteristics. This paper may be helpful to the in-depth study of tin plating technology with bronze ware in the transmission of Chinese semilunar culture.
【作者单位】： 北京大学考古文博学院;山西省考古研究院;
【分类号】：K876.41
，
本文编号：2445264
本文链接：https://www.wllwen.com/shekelunwen/kgx/2445264.html
