新媒体艺术之互动影像装置艺术设计

发布时间：2018-04-21 11:24

本文选题：新媒体艺术 + 互动影像装置　；参考：《设计艺术研究》2016年06期

【摘要】：作为新媒体互动装置艺术的一个重要组成部分,互动影像装置被大众广泛熟悉和应用,在国内互动装置艺术还处于发展中阶段,无论是在科学技术、硬件支持上,还是在艺术层面上都不成熟。面对这样的发展现状,提出了基于光立方改造的新型互动装置的方案,遵循装置艺术的原则,对方案进行实施。总体设计分为主控、显示和捕捉这3个模块,显示是由512个发光二极管焊接而成,51系列单片机作为整个主控中心,捕捉模块是由人体红外传感器和手势传感器组合构成;采用C语言编写程序,把传感器捕捉到的数字信号经过信息处理,通过单片机来控制整个发光二极管的发光,经过各种延时设计,最终让整个立方显示在控制下呈现出不同的3D图形,给观众带来互动感的同时,展现出别样的视觉效果。
[Abstract]:As an important part of the new media interactive device art, interactive video device is widely known and applied by the public. In China, interactive device art is still in the developing stage, whether in science and technology, hardware support, Or in the art level is not mature. In the face of this development situation, the scheme of new interactive device based on light cube transformation is put forward, followed the principle of installation art, and the scheme is carried out. The whole design is divided into three modules: main control module, display module and capture module. Display is made up of 512 light-emitting diodes (LED) welding and the whole main control center is made up of single-chip microcomputer. The capture module is composed of infrared sensor and gesture sensor. C language is used to program the digital signal captured by the sensor through information processing, and the whole light-emitting diode is controlled by single-chip microcomputer, which passes through various delay design. Finally, the whole cubic display presents different 3D graphics under control, which brings the audience a sense of interaction and shows a different visual effect at the same time.
【作者单位】：武汉理工大学;深圳简美互动广告有限公司;
【分类号】：J5

【相似文献】