全球价值链体系下中国制造业转型升级分析

发布时间：2018-04-11 18:28

本文选题：全球价值链 + 产业升级　；参考：《数量经济技术经济研究》2017年06期

【摘要】：研究目标:归纳全球价值链体系下制造业转型升级方向和规律。研究方法:基于WIOD数据和KPWW方法,通过多元面板回归分析寻找GVCs嵌入位置与分工地位之间的关系,将14个制造业产业按GVCs主导环节归类。以40个经济体嵌入位置的时序变化,讨论升级方向对各国产业升级幅度的影响,分析有利于制造业升级的相关因素。研究发现:14个制造业产业可以分为上游环节主导、下游环节主导和混合主导三类;以三类产业的主导环节作为产业升级方向能够提升产业升级幅度;高级生产要素对制造业升级的促进作用强于传统生产要素。研究创新:根据14个产业的主导环节,提出了不同于"二元驱动"的GVCs混合主导型产业。研究价值:明确了三类制造业产业转型升级的方向和影响因素。
[Abstract]:Research objective: induces the direction and law of manufacturing industry transformation and upgrading under the global value chain system.Methods: based on WIOD data and KPWW method, the relationship between the position of GVCs embedding and the position of division of labor was found by multiple panel regression analysis, and 14 manufacturing industries were classified according to the leading links of GVCs.In this paper, the influence of upgrading direction on the industrial upgrading range of each country is discussed with the time series change of embedded position in 40 economies, and the related factors conducive to the upgrading of manufacturing industry are analyzed.It is found that 14 manufacturing industries can be divided into three categories: upstream leading, downstream leading and mixed leading, and taking the leading links of the three industries as the direction of industrial upgrading can enhance the range of industrial upgrading.Advanced factors of production promote the upgrading of manufacturing industry stronger than traditional factors of production.Research and Innovation: according to the leading links of 14 industries, this paper puts forward the mixed leading industry of GVCs, which is different from "dual driving".Research value: identified three types of manufacturing industry transformation and upgrading direction and impact factors.
【作者单位】：武汉理工大学经济学院;
【基金】：国家社科基金重大项目“‘一带一路’相关国家贸易竞争与互补关系研究”(16ZDA039)的资助
【分类号】：F224;F424

【相似文献】