关于P公司电吹风生产线产能提升的研究

发布时间：2018-06-10 14:32

本文选题：排除浪费 + 布局规划　；参考：《华南理工大学》2014年硕士论文

【摘要】：分析制造业多年来的发展，我们可以看出，生产方式的转换越来越快。看看如今的社会，制造决定市场的情形已经一起不复返，永远地成为了历史，现代制造业是以消费者为导向的，买方市场决定了卖方市场。而随着人们生活水平的提高，人们对产品的要求也越来越高，除了产品的功能，价格等关键信息外，人们对产品的外观，品牌，服务等的关注比重逐渐增加。关注就会带来比较，而每个人都有不一样的审美观，不同的人对产品的需求各不一样，这就给制造企业提出了更高的要求。多品种小批量的生产方式必将取代小品种多批量的生产方式。 P公司电吹风生产线是该工厂产量最大、人数最多的生产线，采用了典型的接力式生产模式，近年来由于产品多品种少批量的趋势越来越明显，以及总产量的增加，老式生产线已经无法满足生产需求，急需对生产线进行调整，，以达成提高生产线产能的目的。本文以P公司电吹风生产线产能提升研究为题，通过时间研究分析该生产线现状存在的产能问题，然后通过排除浪费，布局规划，线平衡分析，最终为该生产线制定了特殊的单元生产方式，通过将不同的单元生产方式结合，得到了一种最适合电吹风生产线的布局及生产方式。通过不断循环改善，最终提高了该生产线13%的产能，满足了客户的需求，并且在小家电生产线中具备了一定的推广意义。
[Abstract]:After analyzing the development of manufacturing industry for many years, we can see that the transformation of production mode is faster and faster. Looking at today's society, the situation where manufacturing determines the market is gone forever. Modern manufacturing is consumer-oriented, and the buyer's market determines the seller's market. With the improvement of people's living standards, people's demands on products are becoming higher and higher. In addition to the key information, such as function and price of products, the proportion of people's attention to product appearance, brand, service and so on is increasing gradually. Attention will bring comparison, and everyone has different aesthetic standards, different people have different demand for products, which puts forward higher requirements for manufacturing enterprises. The production mode of multi-variety and small batch will certainly replace the mode of production of small variety and multi-batch. The electric hair dryer production line of P Company is the production line with the largest output and the largest number of people in this factory, and adopts the typical relay production mode. In recent years, due to the trend of more and more varieties and fewer batches of products, and the increase of total output, the old production line has been unable to meet the production demand, so it is urgent to adjust the production line. In order to achieve the purpose of increasing production capacity of production line, this paper takes the research on capacity upgrading of electric hair dryer production line of P Company as a topic, analyzes the production capacity problems existing in the production line through time research, and then through eliminating waste, layout planning, line balance analysis, Finally, a special unit production mode is established for the production line. By combining different unit production methods, a layout and production mode that is most suitable for the production line of hair dryer is obtained. Through continuous circulation improvement, the capacity of the production line is raised by 13%, and the customer's demand is satisfied, and it has certain popularization significance in the production line of small household appliances.
【学位授予单位】：华南理工大学
【学位级别】：硕士
【学位授予年份】：2014
【分类号】：TB497;F273;F426.6

【参考文献】