多挡快换绕丝机的设计

发布时间：2018-12-27 08:35

【摘要】：目的研究扁丝卷绕螺距及错位距离对丝锭质量的影响,分析传动比与卷绕螺距及错位距离的理论联系,解决生产中针对不同规格扁丝收卷换挡难的问题。方法通过反复实验取得经验数据,并结合理论分析设计多挡快换机构,对编织袋生产线上现有的绕丝机进行大幅度的结构改造。结果改造后的绕丝机从原来1台只能对应1种规格扁丝,通过便捷的换挡操作便可应对多种规格扁丝,生产效率和产品质量都得到显著提高。结论适宜的螺距及错位距离对丝锭卷绕质量至关重要,可通过传动比设计有效控制卷绕螺距及错位距离,满足不同规格扁丝的卷绕质量需要,依此设计的多挡快换机构有效解决了生产实际难题。
[Abstract]:Objective to study the influence of winding pitch and misalignment distance of flat wire on the quality of wire ingot, to analyze the theoretical relation between transmission ratio, winding pitch and dislocation distance, and to solve the problem of rewinding and shifting of flat wire with different specifications in production. Methods the experimental data were obtained through repeated experiments, and the multi-shift quick changing mechanism was designed based on the theoretical analysis, and the existing winding machine on the knitting bag production line was reformed greatly. Results the remade wire winding machine can only correspond to one kind of flat wire from the original one, and the production efficiency and product quality can be improved significantly by convenient shifting operation. Conclusion the suitable pitch and misalignment distance are very important to the quality of wire ingots winding, which can be effectively controlled by the design of transmission ratio to meet the needs of winding quality of flat wire of different specifications. According to the design of the multi-gear quick-change mechanism effectively solve the practical production problems.
【作者单位】：安徽电子信息职业技术学院;
【基金】：安徽省高等教育振兴计划重大教学改革研究项目(2015zdjy188) 安徽省卓越人才教育培养计划(2014zjjh068)
【分类号】：TB486

【相似文献】