A企业生产物流设施规划与仿真研究

发布时间：2018-02-11 18:58

本文关键词： 生产物流设施规划层次分析法仿真模拟　出处：《长春理工大学》2015年硕士论文　论文类型：学位论文

【摘要】：本文以A汽车轮胎制造企业为主要的研究对象,由于A企业要投资新建工厂,所以要用国内外普遍认可的系统设施规划布置方法就是系统设施布置(SLP)的方法,构建企业相关设施模型,通过对轮胎生产加工制造的整个工艺流程的了解,确定各个作业单位之间的相互物流关系,计算与分析出相关设施的位置相关图与面积相关图,合理的分析出各个生产车间的布置位置情况,得出比较合理的布置方案,然后运用系统评价方法中的层次分析法,之后构建相关的递阶层次结构,构造对应的判断矩阵,通过公式进行计算,最后得到最精确最合理的布置方案。基于Flexsim系统仿真软件对该方案进行相应的仿真模拟分析,主要是为了验证运用AHP法得出的最佳设备布置方案组织的生产工艺流程是否满足生产要求,确定规划中是否存在瓶颈,仿真之后找到相应的解决办法,确保物流通畅。
[Abstract]:This paper takes A automobile tire manufacturing enterprise as the main research object, because A enterprise wants to invest in the new factory, so must use the system facility layout method which is generally accepted at home and abroad is the system facility layout / SLP method. Through the understanding of the whole technological process of tire production and manufacturing, the mutual logistics relationship between each operation unit is determined, and the location correlation map and area correlation map of the related facilities are calculated and analyzed. Reasonable analysis of the location of each production workshop, a more reasonable layout scheme, and then use the analytic hierarchy process in the system evaluation method, and then build the related hierarchical structure, construct the corresponding judgment matrix, Through the formula calculation, the most accurate and reasonable layout scheme is obtained. The corresponding simulation analysis of the scheme is carried out based on the Flexsim system simulation software. The main purpose of this paper is to verify whether the production process flow of the best equipment layout scheme based on AHP method meets the production requirements, to determine whether there are bottlenecks in the planning, and to find the corresponding solution after simulation to ensure the smooth flow of goods.
【学位授予单位】：长春理工大学
【学位级别】：硕士
【学位授予年份】：2015
【分类号】：F252;F426.72

【参考文献】