基于VR技术的陶瓷产品虚拟展示方式研究
文内图片:
图片说明:丰田互联网汽车展示系统
[Abstract]:Using the advantage of virtual digital display to convey the information of the product to the audience, and the audience can make good use of the information feedback after interacting with the product, which can be used by the merchants and designers to develop new products, so as to shorten the development cycle of new products to the greatest extent, which not only provides great convenience for the development of ceramic products. Moreover, it can avoid the malpractice that the traditional entity display method is not in harmony with the vulnerability characteristics of ceramic products. However, virtual technology and virtual display mode is a unified model, which needs us to apply it to different product display. In this paper, the display elements of ceramic products are analyzed from the principles and characteristics of product display, and the characteristics of virtual display of ceramic products are discussed based on the characteristics of virtual display. According to the function of using, the ceramic products are classified, and the virtual display characteristics of different categories of ceramic products and their suitable virtual display modes are explored. Finally, combining the panoramic display technology of image and the VR display technology of graphics, the best virtual display mode suitable for different categories of ceramic products is made, and the interactive design is realized in virtual software, and then the virtual display application is completed in the network and in the interactive projection of fixed occasions. Through the exploration of the virtual display mode of ceramic products, the best virtual expression mode suitable for different categories of ceramic products is found out. With the support of virtual reality technology, the omni-directional browsing of ceramic products, the roaming of scenes and the interaction of information are realized, which provides an interactive platform for designers and consumers, so that the design can better meet the market demand and improve the efficiency.
【学位授予单位】:景德镇陶瓷学院
【学位级别】:硕士
【学位授予年份】:2012
【分类号】:J527
【参考文献】
相关期刊论文 前10条
1 刘子建;齐丽娜;;基于Cult3D的产品交互式虚拟展示研究及应用[J];包装工程;2009年05期
2 徐志华;;陶艺在室内陈设方式探究[J];景德镇陶瓷;2006年03期
3 唐舟艾;张辉;;Virtools在三维服装展示中的应用[J];纺织科技进展;2008年06期
4 刘启文;邱枫;;基于计算机交互技术的工业设计展示研究[J];武汉理工大学学报;2008年09期
5 陈柏生;张志阳;杜吉祥;;德化陶瓷虚拟展厅[J];信息化纵横;2009年06期
6 孙倩;;基于3DS MAX的三维建模及其在Virtools环境中的应用[J];中国科技信息;2008年12期
7 付大鹏;董继先;;基于Cult 3D的产品虚拟展示研究与应用[J];艺术与设计(理论);2007年12期
8 王春雨;张广文;;Cult3D技术及其在陶瓷产品展示中的应用[J];中国陶瓷;2007年01期
9 王春雨;张广文;齐凯;;基于Web的陶瓷产品三维信息发布技术研究[J];中国陶瓷;2009年10期
10 ;像鸟儿那样看故宫——故宫VR《紫禁城·天子的宫殿》[J];紫禁城;2004年01期
相关博士学位论文 前1条
1 方兴;网络虚拟创新设计理论与实践[D];武汉理工大学;2003年
相关硕士学位论文 前7条
1 黄李华;网络虚拟商品展示的体验设计研究[D];江南大学;2011年
2 孙染;基于Internet的虚拟展示系统的设计与实现[D];北京邮电大学;2007年
3 杜鹤民;基于新媒介艺术的民间工艺保护研究[D];陕西科技大学;2008年
4 俞璋凌;基于web&VR技术的产品展示方法研究[D];合肥工业大学;2009年
5 傅兴;多媒体交互技术在展示设计中的应用研究[D];天津美术学院;2009年
6 戴阳阳;基于交互设计的产品远程展示平台的设计研究[D];山东大学;2010年
7 朱珊虹;基于Web3D的陶瓷产品展示研究与应用[D];景德镇陶瓷学院;2010年
本文编号:2510190
本文链接:https://www.wllwen.com/jingjilunwen/lyjj/2510190.html