柔顺机构拓扑优化设计中的拓扑图提取综述
发布时间：2018-10-05 07:08
【摘要】：针对柔顺机构拓扑优化设计中的拓扑图提取问题,就其中的中间单元、棋盘格和轮廓提取问题进行了详细综述。在此基础上,指出棋盘格的消除、中间单元的取舍和拓扑图的轮廓提取是柔顺机构拓扑图提取中的重要问题,并分析了该三个问题出现的原因。
[Abstract]:Aiming at the problem of topology extraction in topology optimization design of compliant mechanism, the problems of middle unit, chessboard lattice and contour extraction are summarized in detail. On this basis, it is pointed out that the elimination of checkerboard lattice, the selection of intermediate units and the extraction of topology contour are important problems in the extraction of topological graph of compliant mechanism, and the causes of these three problems are analyzed.
【作者单位】： 华南理工大学设计学院;
【基金】：国家自然科学基金(51275174)
【分类号】：TH112
本文编号：2252469
[Abstract]:Aiming at the problem of topology extraction in topology optimization design of compliant mechanism, the problems of middle unit, chessboard lattice and contour extraction are summarized in detail. On this basis, it is pointed out that the elimination of checkerboard lattice, the selection of intermediate units and the extraction of topology contour are important problems in the extraction of topological graph of compliant mechanism, and the causes of these three problems are analyzed.
【作者单位】： 华南理工大学设计学院;
【基金】：国家自然科学基金(51275174)
【分类号】：TH112
【相似文献】
相关期刊论文 前1条
1 方乃伟;吕学强;张丹;王涛;;机械设计图像主轮廓提取算法研究[J];计算机工程与设计;2013年08期
，本文编号：2252469
本文链接：https://www.wllwen.com/jixiegongchenglunwen/2252469.html
