球套球套方设计及加工理论的探讨
发布时间：2019-01-10 07:57
【摘要】：对在机加工中加工任意直径球体,使其呈现球中套球再套方的工艺品外观的设计及其加工理论的探讨。外球体里面如果加工出可以自由活动的正方体或球体,加工应从里向外逐层加工。另外此球套球结构是否能用于陀螺仪,还有待进一步探讨。
[Abstract]:This paper probes into the design and processing theory of the handicraft appearance of making the sphere with arbitrary diameter in machining so as to present the square of the ball set in the ball. If free-moving cubes or spheres are produced inside the outer sphere, the processing shall be done from inside to outside. In addition, whether the ball sleeve structure can be used in gyroscopes remains to be further discussed.
【作者单位】： 大连民族大学;大连豪森瑞德设备制造有限公司;大连工业大学;
【基金】：辽宁省科技厅项目(201602196) 中央高校基本科研业务费专项资金项目(DC201502010305)
【分类号】：TH16
本文编号：2406076
[Abstract]:This paper probes into the design and processing theory of the handicraft appearance of making the sphere with arbitrary diameter in machining so as to present the square of the ball set in the ball. If free-moving cubes or spheres are produced inside the outer sphere, the processing shall be done from inside to outside. In addition, whether the ball sleeve structure can be used in gyroscopes remains to be further discussed.
【作者单位】： 大连民族大学;大连豪森瑞德设备制造有限公司;大连工业大学;
【基金】：辽宁省科技厅项目(201602196) 中央高校基本科研业务费专项资金项目(DC201502010305)
【分类号】：TH16
【相似文献】
相关期刊论文 前2条
1 胡有亮;李勇;陈水莲;;正六边形负压桶强度及稳定性分析[J];石油和化工设备;2013年09期
2 ;[J];;年期
，本文编号：2406076
本文链接：https://www.wllwen.com/jixiegongchenglunwen/2406076.html
