乏风瓦斯催化氧化监控系统设计与研究
发布时间：2018-07-16 13:11
【摘要】：为解决乏风瓦斯催化氧化利用监控设计中存在的"信息孤岛"与"重复建设"问题,以提高安全监控系统的可靠性与稳定性为目的,设计了一套乏风瓦斯催化氧化综合监控系统,其综合了监控瓦斯掺混系统、逆流回热系统、离心压气机系统、催化燃烧室、发电机,实现对乏风瓦斯催化氧化过程的远程监控。分析了乏风瓦斯催化燃烧燃气轮机发电工艺流程、监控系统控制原理,以及系统控制流程,对系统安全防护硬件、软件进行了设计,工业性试验表明,该综合监控系统具有良好的稳定性与可靠性。
[Abstract]:In order to solve the problems of "information isolated island" and "repeated construction" in the monitoring design of catalytic oxidation of spent air gas, the purpose of this paper is to improve the reliability and stability of the safety monitoring system. A comprehensive monitoring system for catalytic oxidation of spent air gas is designed, which integrates monitoring gas mixing system, countercurrent regenerative system, centrifugal compressor system, catalytic combustor and generator to realize remote monitoring of the process of catalytic oxidation of spent air gas. In this paper, the process of generating electricity, the control principle of monitoring system and the control flow of system are analyzed. The hardware and software of system safety protection are designed. The industrial test shows that, The system has good stability and reliability.
【作者单位】： 瓦斯灾害监控与应急技术国家重点实验室;中煤科工集团重庆研究院有限公司;
【基金】：“十二五”国家科技重大专项(2011ZX05041-005)
【分类号】：TD712;TD67
[Abstract]:In order to solve the problems of "information isolated island" and "repeated construction" in the monitoring design of catalytic oxidation of spent air gas, the purpose of this paper is to improve the reliability and stability of the safety monitoring system. A comprehensive monitoring system for catalytic oxidation of spent air gas is designed, which integrates monitoring gas mixing system, countercurrent regenerative system, centrifugal compressor system, catalytic combustor and generator to realize remote monitoring of the process of catalytic oxidation of spent air gas. In this paper, the process of generating electricity, the control principle of monitoring system and the control flow of system are analyzed. The hardware and software of system safety protection are designed. The industrial test shows that, The system has good stability and reliability.
【作者单位】： 瓦斯灾害监控与应急技术国家重点实验室;中煤科工集团重庆研究院有限公司;
【基金】：“十二五”国家科技重大专项(2011ZX05041-005)
【分类号】：TD712;TD67
【参考文献】
相关期刊论文 前6条
1 王春波;李云鹏;危日光;周慧;;西门子PLC在油管防腐热固化炉上的应用[J];电气传动;2009年03期
2 杨磊;綦耀光;任旭虎;刘新福;;基于PLC的构造物理模拟实验系统控制技术研究[J];电气传动;2011年07期
3 康建东;兰波;严政;高鹏飞;许慧娟;龙伍见;;乏风瓦斯蓄热氧化试验研究[J];矿业安全与环保;2013年01期
4 杨汝琳;;蜂窝状催化剂的应用[J];贵金属;1981年02期
5 李硕;李鹏阳;;基于PLC的退火炉温度控制系统[J];计算机工程;2010年05期
6 王华;王言堂;刘猛;;矿井中央水泵房自动化排水系统的设计[J];煤矿机电;2010年05期
【共引文献】
相关期刊论文 前10条
1 李景魁;;钢铁厂高炉供料自动控制系统设计[J];电气应用;2011年24期
2 都世锋;景晓军;g，
本文编号：2126492
本文链接：https://www.wllwen.com/kejilunwen/anquangongcheng/2126492.html
