300W风电机组新型蓄电池充电控制器的设计

发布时间：2018-05-05 19:03

本文选题：小型风电机组 + 充电控制器　；参考：《内蒙古农业大学》2017年硕士论文

【摘要】：风力发电是新能源开发利用的主要形式,小型风电机组是风力发电的重要组成部分。小型风电机组因其经济、灵活等优点被广泛应用在各个领域。从工程实际选题,以300W小型风力发电机组中蓄电池充电控制器为对象进行研究。通过软件平台MATLAB/SIMIULINK对300W风电机组搭建模型并进行仿真,仿真结果能较准确的反映实际机组运行过程。为使充电控制器更智能的服务于小型风电机组,在充电控制器中增加了蓄电池剩余容量功能,通过参考大量文献资料拟定了一种设计方案。硬件方面以PIC16F877A为控制芯片,进行了原理图设计、元器件选型以及PCB制板。软件方面以MPLAB-IED作为运行平台,用PICC编译器对控制程序进行了 C语言编程。通过对蓄电池剩余容量以及充电控制器的研究,为300W小型风力发电机组增加了剩余容量检测功能,可以为控制器的开发使用提供一定的理论指导意义。
[Abstract]:Wind power generation is the main form of new energy development and utilization, and small wind turbine is an important part of wind power generation. Small wind turbines are widely used in various fields because of their advantages of economy and flexibility. In this paper, the battery charging controller of 300W small wind turbine is selected as the research object. The model of 300W wind turbine is built and simulated by software platform MATLAB/SIMIULINK. The simulation results can accurately reflect the actual operation process of the wind turbine. In order to make the charging controller more intelligent to serve the small wind turbine, the function of battery residual capacity is added to the charging controller. A design scheme is proposed by referring to a large number of references. In the aspect of hardware, PIC16F877A is used as the control chip, the schematic design, the selection of components and PCB board are carried out. In software aspect, MPLAB-IED is used as the running platform and PICC compiler is used to program the control program in C language. Through the research of battery residual capacity and charging controller, the residual capacity detection function is added for 300W small wind turbine generator, which can provide some theoretical guidance for the development and application of the controller.
【学位授予单位】：内蒙古农业大学
【学位级别】：硕士
【学位授予年份】：2017
【分类号】：TM315;TM910.6

【参考文献】