核脉冲成型中高频馈通现象的电路改进
发布时间：2019-05-29 12:21
【摘要】：对单电源供电的前端核脉冲成型电路分析发现,传统核脉冲成型中会出现高频馈通现象.对高频馈通现象进行理论分析,提出了一种简单连接附加电容的方法解决了此问题.通过在Multisim中仿真,证明了改进的电路能很好地抑制核脉冲成型中高频馈通现象.
[Abstract]:Through the analysis of the front-end nuclear pulse forming circuit supplied by single power supply, it is found that the high frequency feed-through phenomenon will occur in the traditional nuclear pulse molding. Based on the theoretical analysis of the phenomenon of high frequency feed through, a simple method of connecting additional capacitance is proposed to solve this problem. Through the simulation in Multisim, it is proved that the improved circuit can suppress the high frequency feed-through phenomenon in nuclear pulse forming.
【作者单位】： 上海应用技术大学电气与电子工程学院;
【分类号】：TN702
本文编号：2487926
[Abstract]:Through the analysis of the front-end nuclear pulse forming circuit supplied by single power supply, it is found that the high frequency feed-through phenomenon will occur in the traditional nuclear pulse molding. Based on the theoretical analysis of the phenomenon of high frequency feed through, a simple method of connecting additional capacitance is proposed to solve this problem. Through the simulation in Multisim, it is proved that the improved circuit can suppress the high frequency feed-through phenomenon in nuclear pulse forming.
【作者单位】： 上海应用技术大学电气与电子工程学院;
【分类号】：TN702
【相似文献】
相关期刊论文 前5条
1 李东仓;李庆;杨磊;袁树林;杨映辉;张福甲;;多模式仿核脉冲随机信号发生器研究[J];兰州大学学报(自然科学版);2007年03期
2 李东仓;杨磊;袁树林;杨映辉;张福甲;;仿核脉冲的随机信号发生器研究[J];核电子学与探测技术;2007年02期
3 崔辰元;曾卫华;陈宏;徐奥;;基于FPGA的数字核脉冲处理硬件平台设计[J];现代电子技术;2013年18期
4 刘俊;刘京诚;谢磊;何伟;李茹杰;翟值楚;;核脉冲参数检测系统的FPGA实现[J];国外电子测量技术;2010年08期
5 ;[J];;年期
，本文编号：2487926
本文链接：https://www.wllwen.com/kejilunwen/dianzigongchenglunwen/2487926.html
