mold technique 的翻译结果

  本文关键词：压力铸造工艺及模具技术的现代设计理论方法研究，由笔耕文化传播整理发布。

 在分类学科中查询

所有学科

mold technique

     Research on Modern Design Theory and Method for Die Casting Process and Mold Technique

     压力铸造工艺及模具技术的现代设计理论方法研究

短句来源

     Self-creativity level of die casting processing and its mold technique can be prompted effectively by the modern design theory and method.

     现代设计理论方法有效地提高压铸工艺及模具技术的自主创新水平。

短句来源

     Study on bag mold technique of vacuum pressure impregnation for HT-7U poloidal magnet coils

     HT-7U极向场磁体线圈真空压力浸渍袋模工艺的研究

短句来源

     The results shows that,compared with water cooling copper mold,microstructure with grain size of 5 μm in diameter could be obtained by Sn-cooling copper mold technique,which was refined 37.5% than that made by water-cooling copper mold(8 μm);

     结果表明,应用Sn冷铜型方法,可以将试样的晶粒尺寸细化到5μm,与相同条件下水冷铜型得到的试样(8μm)相比,晶粒尺寸细化了37.5%;

短句来源

     SEM MOLD TECHNIQUE USED FOR ANALYSING THE PORE TEXTURE OF OIL SANDSTONE WITH A LOW PERMEABILITY

     安山岩中黄铜矿矿石分析和制硫酸铜工艺的研究

短句来源

     The ships acts for the data warehouse and OLAPs of the industry to set up the mold technique

     船舶代理业的数据仓库及OLAP建模技术

短句来源

     PZT powders were made using oxide sintering technique. X-ray diffraction (XRD) peaks of powders were monitored and showed that PZT was in crystallization phase of pure square with Zr/Ti of 52:48. The pattern of the PZT powder was observed with SEMI the mold technique of PVDF was analyzed by TG-DTA.

     X射线衍射测试表明，用氧化物烧结法制备的PZT粉末，其Zr与Ti的原子比为52：48， 为纯四方钙钛矿型结晶相；

短句来源

更多       

     technique.

     这一技术可以增加3dB带宽。

短句来源

     Research on New Technique of Mold Filling

     铸造充型过程模拟新技术研究

短句来源

     A New Cleaning Technique for Curing Mold

     新一代橡胶硫化模具清洗技术

短句来源

     Microcasting Technique

     微铸造技术

短句来源

查询“mold technique”译词为用户自定义的双语例句
    我想查看译文中含有：的双语例句

为了更好的帮助您理解掌握查询词或其译词在地道英语中的实际用法，我们为您准备了出自英文原文的大量英语例句，供您参考。

  mold technique

This method is essentially a lost-mold technique with negative molds made with Stereolithography and a highly loaded curable HA suspension as the ceramic carrier.

This study presents the clinical experience of high-dose-rate (HDR) brachytherapy for head and neck cancer treated by a customized intraoral mold technique.

Experience of high-dose-rate brachytherapy for head and neck cancer treated by a customized intraoral mold technique

Using this mold technique, we studied the specific weight of mammary tissues, and found an average volume of 360 to 390 cc in normal women.

Impression of the expanded buccopharyngeal cavity has been made by a paraffin mold technique, which confirms the displacement of the buccopharyngeal elements during expansion of the cavity.

更多          

Traditional techniques are living relics that must been investigated,conserved and studied.In this paper,it is discussed unique advantages about traditional casting technique and important inspiration for studies in the history of natural sciences.With the help of plant opal fossils examination,it is clear that close relations between ancient traditional and clay mold techniques.

传统技术是活的文物,应该加以整理、保护与研究,传统技术所包含的古代科技信息对古代技术研究有极大的启示。传统泥型铸造技术为研究中国古代陶范铸造技术提供了重要信息;植物硅酸体测试结果表明,传统泥型铸造技术与古代陶范铸造技术有着密切的关系。

Application of the SEM mold technique to researching the pore texture of oil sandstone with a low permeability can upgrade the research from by 2 D analysing on thin sections to by 3 D observing in a mold sample,thereby greatly improving the prcdision and reliability of the reseach results. However,the key to reach the goal,as shown in the experimental report,is how to prepare the qualified mold samples.

安山岩中的黄铜矿是庐江中生代陆相火山热液型铜矿床的原生矿，矿石中主要伴生黄铁矿及少量斑铜矿、赤铁矿和褐铁矿。物相分析结果，黄铜矿的粒度很细，，只有细磨才能单体解离；它在矿石中分布极不均匀，且与脉石矿物接触疏松，适于粗磨抛尾。物性分析结果，黄铜矿在４００～５３０℃、斑铜矿在４５０～６００℃、黄铁矿在５００～６８０℃氧化分解。实验研究表明，矿石经磨碎磁选，大部分的粗粒级的铁矿物能够回收；粗磨抛尾可获得铜、硫的粗精矿；然后再经硫酸化焙烧、酸浸、过滤、提纯、浓缩结晶可制得工业级硫酸铜。浸渣做炼铁原料，黄钾铁矾做Ｆｅ２Ｏ３颜料，有时还可回收金、银。

PZT powders were made using oxide sintering technique. X-ray diffraction (XRD) peaks of powders were monitored and showed that PZT was in crystallization phase of pure square with Zr/Ti of 52:48. The pattern of the PZT powder was observed with SEMI the mold technique of PVDF was analyzed by TG-DTA. Six sorts of PZT/PVDF composites were obtained with different PZT volume ratio by compression moulding/sintering technique. Tests of dielectric and piezoelectric showed that electric parameter accretion...

PZT powders were made using oxide sintering technique. X-ray diffraction (XRD) peaks of powders were monitored and showed that PZT was in crystallization phase of pure square with Zr/Ti of 52:48. The pattern of the PZT powder was observed with SEMI the mold technique of PVDF was analyzed by TG-DTA. Six sorts of PZT/PVDF composites were obtained with different PZT volume ratio by compression moulding/sintering technique. Tests of dielectric and piezoelectric showed that electric parameter accretion with PZT content increased nonlinearly, when the volume content of PZT exceeds 70%, dielectric constantε and piezoeclectric constant increased rapidly, when it reached 90% the electric parameters were almost the same as the pure PZT's.

Ｘ射线衍射测试表明，用氧化物烧结法制备的ＰＺＴ粉末，其Ｚｒ与Ｔｉ的原子比为５２：４８， 为纯四方钙钛矿型结晶相；用模压／烧结工艺制备了六种含 ＰＺＴ不同体积分数的 ＰＺＴ／ＰＶＤＦ复合材 料；介电性和压电性的测试表明，随着 ＰＺＴ体积分数的增加，材料的电性能参数呈非线性增大，当 ＰＺＴ 的体积分数超过 ７０％时，介电常数。和压电常数 ｄ３３值迅速增加，当 ＰＺＴ体积分数达到 ９０％时，其 电性能与纯 ＰＺＴ相当。

<< 更多相关文摘    

 相关查询

CNKI小工具

在英文学术搜索中查有关mold technique的内容

在知识搜索中查有关mold technique的内容

在数字搜索中查有关mold technique的内容

在概念知识元中查有关mold technique的内容

在学术趋势中查有关mold technique的内容

  本文关键词：压力铸造工艺及模具技术的现代设计理论方法研究，由笔耕文化传播整理发布。