38CrMoAl活塞杆耐腐蚀性能研究
发布时间：2018-08-15 16:06
【摘要】：采用小多弧离子镀制备了TiN涂层。通过金相显微镜、分析天平及X射线衍射(XRD)研究了有无镀覆TiN涂层的活塞杆材料(38CrMoAl)在高温、水蒸气及酸性条件下的耐腐蚀性能。结果表明,200℃下两种样品未被氧化,400℃下38CrMoAl样品表面氧化,而镀有TiN薄膜的样品表面无明显变化,600℃下镀有TiN涂层样品氧化;3种腐蚀条件下,有TiN涂层的38CrMoAl活塞杆比未镀覆涂层的活塞杆耐腐蚀性能好。
[Abstract]:TiN coatings were prepared by small multi-arc ion plating. The corrosion resistance of piston rod material (38CrMoAl) coated with or without TiN coating at high temperature, water vapor and acid conditions was studied by metallographic microscope and X-ray diffraction (XRD). The results showed that the two samples were not oxidized by 38CrMoAl at 400 鈩，
本文编号：2184713
[Abstract]:TiN coatings were prepared by small multi-arc ion plating. The corrosion resistance of piston rod material (38CrMoAl) coated with or without TiN coating at high temperature, water vapor and acid conditions was studied by metallographic microscope and X-ray diffraction (XRD). The results showed that the two samples were not oxidized by 38CrMoAl at 400 鈩，
本文编号：2184713
本文链接：https://www.wllwen.com/kejilunwen/jiagonggongyi/2184713.html
