提高马达壳体加工效率的工艺方法

发布时间：2018-03-31 20:36

  本文选题：立式加工中心　切入点：非圆内腔零件　出处：《工具技术》2015年11期

【摘要】：以在立式加工中心加工典型零件为例,通过工艺难点分析,设计出合理的工艺方案,选择适宜的刀具,优化、完善加工程序和切削参数,解决了马达壳体加工时存在的积屑瘤和振纹、表面粗糙度差、尺寸公差不易保证、刀具磨损快、易折断等加工难题。
[Abstract]:Taking typical parts machined in vertical machining center as an example, through the analysis of process difficulties, a reasonable process scheme is designed, suitable cutting tools are selected, the machining procedure and cutting parameters are optimized, and the machining procedures and cutting parameters are improved. The problems in machining such as chip nodule and vibration, surface roughness, dimension tolerance are not easy to be guaranteed, tool wear is fast and fracture is easy to be broken, etc.
【作者单位】： 湖北三江航天红林探控有限公司;航天科工四院控制设备研究所;
【分类号】：TG659
，

本文编号：1692343