槽楔专用量具的改进

发布时间：2018-04-20 00:38

  本文选题：槽楔 + 传统测量方法　； 参考：《工具技术》2015年12期

【摘要】：正1传统测量方法的缺陷高压电机绕组定子槽楔几何尺寸复杂、形状多样,常用的槽楔图形如图1所示。其几何形状尺寸能否达到设计要求,直接影响槽楔装配质量。槽楔的几何形状与铁心槽口不吻合、尺寸过大,槽楔装配困难,安装敲打槽楔时用力过猛可能将其打裂损伤,电机运行时,槽楔受热、磁、电等因素的影响产生松
[Abstract]:The stator slot wedge of the winding of high voltage motor is complicated in geometry and various in shape. The commonly used slot wedge figure is shown in figure 1. Whether the geometric shape and size can meet the design requirements directly affects the assembly quality of slot wedges. The geometric shape of the slot wedge does not coincide with the core groove, the size is too large, the slot wedge is difficult to assemble, the excessive force during the installation of the slot wedge may crack and damage it, and when the motor is running, the slot wedge will be heated, magnetic, electric and other factors will make it loose.
【作者单位】： 卧龙电气淮安清江电机有限公司;
【分类号】：TG802

【相似文献】

中国期刊全文数据库 前4条

1 ;磁性槽楔节电[J];有色设备;1990年02期

2 杨始X;林少琨;陈玉君;;电机绝缘槽楔材料之—杜帮公司(美)涤纶厚膜的剖析[J];绝缘材料通讯;1983年04期

3 丁善文;;槽楔压模的设计与制造[J];金属加工(热加工);2010年09期

4 ;[J];;年期

，

本文编号：1775484