金属微滴三维打印成形数据处理软件的设计开发

发布时间：2018-03-25 21:15

  本文选题：金属微滴　切入点：三维打印　出处：《机械设计与制造》2014年08期

【摘要】：金属微滴三维打印成形技术是一种新的快速分层制造方法,为了获取零件模型的离散化层面数据,实现零件的分层打印制造。依据金属微滴三维打印成形工艺原理,利用Visual C++6.0和Open GL,在Windows XP平台上,开发出面向金属微滴三维打印成形工艺的数据处理软件。利用该软件得到的成形数据信息,以Sn60/Pb40合金为试验材料,在280℃喷射温度、100k Pa喷射压力和200μm熔滴直径下,进行了打印沉积试验,打印成形结果与零件模型吻合较好,验证了数据处理软件的可行性,为金属微滴三维打印成形技术的发展奠定了基础。
[Abstract]:Three-dimensional printing forming technology for metal droplets is a new rapid layered manufacturing method. In order to obtain discrete layer data of part model and realize layering printing manufacturing of parts, the three-dimensional printing forming technology of metal droplet is based on the principle of three-dimensional printing forming technology of metal droplets. Using Visual C 6.0 and Open GL, the data processing software of 3D printing forming process for metal droplets was developed on the platform of Windows XP. Using the forming data information obtained by the software, the Sn60/Pb40 alloy was used as the experimental material. Under the injection pressure of 100kPa at 280 鈩，

本文编号：1664904