熔融沉积成型彩色3D打印机的研究

发布时间：2018-05-02 06:37

  本文选题：FDM + 彩色D打印机　； 参考：《机床与液压》2017年04期

【摘要】：当前基于FDM的3D打印机大部分只能使用一种颜色的耗材,因此打印件颜色单一。为了解决这一问题,在深入研究FDM 3D打印机工作原理的基础上,设计一套彩色3D打印机挤出装置,对普通切片软件进行了二次开发,编写了与挤出装置相匹配的彩色切片插件,并进行了样机的试制与调试。通过打印试验,验证了所设计的挤出装置及彩色切片插件达到了设计要求,实现了彩色打印,为彩色3D打印技术的进一步研究提供参考。
[Abstract]:At present, 3D printers based on FDM can only use one color of consumables, so the color of printed parts is single. In order to solve this problem, a set of color 3D printer extrusion device is designed on the basis of deeply studying the working principle of FDM 3D printer. The common slice software is redeveloped, and the color slicing plug-in matching with the extrusion device is compiled. The prototype is trial-produced and debugged. Through the printing test, it is verified that the extrusion device and the color chip plug-in have met the design requirements, and the color printing has been realized, which provides a reference for the further research of color 3D printing technology.
【作者单位】： 郑州科技学院机械工程学院;
【基金】：河南省科技厅科技攻关项目(142102210509) 河南省教育厅重点科技攻关项目(14A460015)
【分类号】：TP334.8
，

本文编号：1832782