矿井电网安全监控网络化系统研究
[Abstract]:Mine power supply network is a safe and efficient power source for coal mine production. The intelligent and automatic degree of coal mine is developing and improving continuously. At the same time, the security, reliability and continuity of mine power supply system are required more and more strictly. At present, the microcomputer monitoring and protection system with microprocessor as the core has been widely used in the field of mine power supply and distribution network to form a high and low voltage distribution monitoring subsystem. However, these subsystems are independent of each other, monitoring information can not be shared, resulting in the operation of the coal mine power supply system is still in the passive situation of relying on reports to report one by one, and the power supply security can not be guaranteed when the operation mode of the power grid is changed. In addition, the underground high-voltage power supply system is a multi-segment short cable composed of a single power supply step by step control trunk type longitudinal power supply network. The action value of the current quick-break protection between the stages is calculated according to the conventional method, and the overstep tripping phenomenon often occurs in the protection device. In this paper, a set of mine power network safety monitoring network system is developed. It is intended to apply microcomputer protection technology of mine distribution network switchgear, distribution network operation CAD and network technology to network the safety monitoring equipment and subsystem of mine high and low voltage power network. The feed IED and incoming IED are used for multi-level communication and information sharing. In order to construct the underground power supply network security protection, monitoring and early warning system based on artificial intelligence, the coal mine power supply network security guarantee system is formed. In this system, the MCGSTPC7062K embedded touch screen is installed in every substation of underground mining area, and the SNP-2611 mine monitoring and protection device is installed in each high voltage switch cabinet. The monitoring and protection device collects the operation status information of each switchgear in real time, transmits it to TPC7062K, through 485 communication and displays the power parameters. The TPC7062K embedded touch screen control sub-station transmits the underground information to the ground monitoring host through Ethernet ring network. The implementation of this project provides technical support for eliminating the long-standing hidden danger of overstepping trip caused by short-circuit fault in high-voltage power network of mine. So the research of this subject has great practical value and important significance to the safe and efficient production of coal mine.
【学位授予单位】:青岛科技大学
【学位级别】:硕士
【学位授予年份】:2012
【分类号】:TP368.12;TD611
【参考文献】
相关期刊论文 前10条
1 董海鹰;孙传华;;Research on Power Control of Wind Power Generation Based on Neural Network Adaptive[J];Journal of Measurement Science and Instrumentation;2010年02期
2 葛耀中,杜兆强,刘浩芳;自适应速断保护的动作性能分析[J];电力系统自动化;2001年18期
3 丁晓群,林钟云;神经网络应用于电力变压器故障诊断[J];电力系统自动化;1996年02期
4 田书;张胜朝;;矿井高压电网的自适应过流保护研究[J];电网技术;2008年06期
5 李杨帆;蒋品群;李廷会;隆媛媛;;基于MCGS和MATLAB的薄膜厚度控制系统仿真[J];广西师范大学学报(自然科学版);2010年02期
6 张桓;赵树忠;;基于Modbus协议的单片机与触摸屏通讯系统设计[J];河北理工大学学报(自然科学版);2010年04期
7 刘健,赵海鸣;继电保护整定计算及定值仿真系统[J];继电器;2002年09期
8 成艳;宋丽君;王文;郜竹金;杨以涵;戚宇林;;35kV线路故障定位的系统研究和实现[J];继电器;2007年08期
9 张永建;刘少荷;王维;;基于MCGS的矿用主通风机在线监测与控制系统[J];机械设计与制造;2009年10期
10 李洪珠,付兴武,李季;在VB程序中调用MATLAB计算短路电流方法的研究[J];辽宁工学院学报;2004年04期
相关硕士学位论文 前3条
1 付博峰;配电网故障定位及网络重构研究[D];重庆大学;2004年
2 刘洪春;PLC和组态软件在变电站控制系统中的应用研究[D];河北工业大学;2007年
3 王俊成;配电网小电流接地故障自动定位系统研究[D];山东大学;2008年
本文编号:2442739
本文链接:https://www.wllwen.com/kejilunwen/jisuanjikexuelunwen/2442739.html