装配生产线平衡分析与研究

发布时间：2018-01-08 05:10

本文关键词：装配生产线平衡分析与研究　出处：《上海交通大学》2011年硕士论文　论文类型：学位论文

【摘要】：装配生产线是一种广泛存在的制造系统，在设计和管理装配生产线的过程中的一个至关重要的问题就是装配生产线的平衡，因为装配生产线的平衡与否直接影响到整个制造系统的生产率。在过去的将近一百年的时间里，人们对装配生产线的平衡问题进行了大量的分析与研究，提出了各种各样的解决方案和各种算法。虽然我国是一个制造大国，但是对于装配生产线平衡问题的重视还不太够，许多装配生产线的平衡率都处于较低的水平，因此非常有意义来深入的分析和研究装配生产线的平衡。本文首先引用工业工程学的方法确定装配生产线平衡问题中的两个关键数据，，即作业要素的优先关系图和作业要素的标准作业时间。然后设计了基于禁忌搜索算法求解装配生产线平衡问题的流程，并用Matlab进行编程求解。最后，以安弗施公司的基站天线装配生产线为例，利用本文提出的基于禁忌搜索算法的装配生产线平衡方法进行改进，取得了不错的结果。
[Abstract]:The assembly line is a manufacturing system widely exists, a crucial process in the design and management of assembly line in the assembly line balancing problem is, because the assembly line balance or not directly affect the productivity of the system. In the past one hundred years, the analysis and Research on a large number of people on the assembly line balancing problem, put forward all kinds of solutions and algorithms. Although China is a big manufacturing country, but for the assembly line balancing problem of attention is not enough, some of the assembly line balance rate is relatively low, so the analysis very meaningful to further study and assembly line balancing.
Two key data in this paper refer to the industrial engineering method to determine the assembly line balancing problem, standard operation time relation diagram and operation factors: operation factors. Then design a tabu search equilibrium problem solving algorithm based on assembly line process, and programming with Matlab. Finally, the RFs base station the antenna assembly line, for example, the proposed assembly line balancing method based on tabu search algorithm was improved, and achieved good results.

【学位授予单位】：上海交通大学
【学位级别】：硕士
【学位授予年份】：2011
【分类号】：TH182

【引证文献】