3D打印技术在织机打纬-开口机构中的应用

发布时间：2018-03-10 23:01

本文选题：D打印　切入点：纺织机械　出处：《纺织学报》2017年01期 　论文类型：期刊论文

【摘要】：为降低复杂纺织机械装备的设计成本与制造难度,将3D打印技术应用于纺机功能模块比例模型研制。设计了连杆式打纬-开口机构的数字化样机,并将其转化为STL格式进行切片处理和模型包计算,通过分析比较模型的放置方向、材料用量及成型时间等因素,确定最优3D打印工艺参数。借助工业级3D打印机制作了比例模型,并通过C语言和单片机成功开发了机电一体化系统控制平台。利用3D打印一次成型的技术优势,有利于降低物理样机的研发成本和实验难度,且为纺织机械装备的模型展示、机构验证、性能评估及可靠性分析等提供了新的思路与参考。
[Abstract]:In order to reduce the design cost and manufacturing difficulty of complex textile machinery and equipment, the 3D printing technology was applied to the development of the proportional model of the functional module of the spinning machine. The digital prototype of the connecting rod beating-up and opening mechanism was designed. Then it is transformed into STL format for slice processing and model package calculation. By analyzing and comparing the factors such as the orientation of the model, the amount of material used and the forming time, etc. The optimal 3D printing process parameters are determined. The scale model is made with the help of industrial 3D printer, and the control platform of mechatronics system is successfully developed by C language and single chip microcomputer. It is beneficial to reduce the cost of research and development of physical prototype and the difficulty of experiment. It also provides new ideas and references for model display, mechanism verification, performance evaluation and reliability analysis of textile machinery and equipment.
【作者单位】：西京学院机械工程学院;
【基金】：陕西省教育厅专项科研计划项目(15JK2177) 西京学院科研基金项目(XJ150216)
【分类号】：TP391.73;TS103.33

【相似文献】