火灾作用下锚具对预应力钢棒锚固性能退化规律研究
发布时间:2018-05-17 07:57
本文选题:预应力(PC)钢棒 + 火灾试验 ; 参考:《建筑结构学报》2014年03期
【摘要】:为研究火灾作用下锚具对预应力(PC)钢棒锚固性能退化规律,完成65组由JXM型锚具、混凝土块、抗拉强度标准值为970 MPa的7高强PC钢棒及反力架组成的预应力锚固系统高温性能试验,其中29组为裸露锚具高温瞬态试验,18组为裸露锚具高温稳态试验,18组为带防火保护的锚具高温瞬态试验。研究PC钢棒应力水平(0.2~0.7)、温度(20~800℃)、防火保护措施(灌浆料封锚、涂抹防火涂料、灌浆料封锚后再涂抹防火涂料)和升温速率(10.0、26.7℃/min)对锚固性能的影响。裸露锚具高温瞬态试验结果表明:高温下锚固系统破坏模式为PC钢棒在锚具中发生滑移;PC钢棒的应力水平越高、温度越高、升温速率越大,锚固系统破坏时间越短。高温稳态试验结果表明:温度低于400℃时,锚固系统破坏模式为PC钢棒被拉断,温度高于400℃时,破坏模式为PC钢棒从锚具中滑移;高温后锚具不能再使用。带防火保护的高温瞬态试验结果表明:锚固系统破坏模式为PC钢棒从锚具中滑移,防火保护不改变锚固系统的破坏模式;与无防火保护措施相比,三种保护措施下锚固系统破坏时间均提高100%以上;若将GB 14907—2002《钢结构防火涂料》关于钢结构防火涂料厚度的要求直接应用于预应力锚具防火,将偏于不安全。
[Abstract]:In order to study the degradation rule of anchoring performance of prestressed steel bars under fire, 65 groups of JXM anchors and concrete blocks were completed. High temperature performance test of prestressed Anchorage system composed of 7 high strength PC steel bar and counterforce frame with 970 MPa tensile strength standard value, Among them 29 groups were exposed Anchorage high temperature transient test and 18 groups were exposed Anchorage high temperature steady state test and 18 group were high temperature transient test with fire protection. The effects of stress level of PC steel bar (0.2o 0.7), temperature of 20 鈩,
本文编号:1900581
本文链接:https://www.wllwen.com/kejilunwen/sgjslw/1900581.html