基于MSC.MARC的结构拆柱加固分析
发布时间：2018-12-27 06:48
【摘要】：既有建筑的改造中,为了满足建筑布局的要求,部分结构构件需要拆除。本文结合实际工程,讨论建筑的改造中,结构拆柱的加固方法,并运用有限元分析软件,对结构加固后的相关构件进行受力分析。分析结果表明,本文的钢-混凝土组合梁加固方法能既满足结构加固要求,又满足建筑布局要求。
[Abstract]:In order to meet the requirements of building layout, some structural components need to be removed in the reconstruction of existing buildings. In this paper, combining with practical engineering, this paper discusses the strengthening method of removing columns in the reconstruction of buildings, and analyzes the forces on the relative members after strengthening by using the finite element analysis software. The results show that the reinforcement method of steel-concrete composite beam in this paper can not only meet the requirements of structural reinforcement but also meet the requirements of building layout.
【作者单位】： 中国建筑科学研究院工程抗震研究所;北京城建七建设工程有限公司;
【分类号】：TU375.4
[Abstract]:In order to meet the requirements of building layout, some structural components need to be removed in the reconstruction of existing buildings. In this paper, combining with practical engineering, this paper discusses the strengthening method of removing columns in the reconstruction of buildings, and analyzes the forces on the relative members after strengthening by using the finite element analysis software. The results show that the reinforcement method of steel-concrete composite beam in this paper can not only meet the requirements of structural reinforcement but also meet the requirements of building layout.
【作者单位】： 中国建筑科学研究院工程抗震研究所;北京城建七建设工程有限公司;
【分类号】：TU375.4
【相似文献】
相关期刊论文 前10条
1 刘飞;郭栋;梁利利;;基于MSC.MARC的钢筋混凝土核心筒有限元模型[J];四川建材;2011年03期
2 王军;王玉梅;王安国;;基于MSC.Marc的某高速列车一系悬挂钢弹簧疲劳断裂原因分析[J];机械工业标准化与质量;2013年10期
3 李大勇;石绍清;刘云龙;;基于MSC.Marc锯切仿真的钢管锯切夹紧力研究[J];机械工程师;2013年08期
4 李元鹏;宋连浩;;基于MSC.Marc分析的模型相似关系研究[J];安徽水利水电职业技术学院学报;2011年04期
5 张学武;;基于MSC.MARC有限元的接触网——受电弓仿真研究[J];甘肃科技纵横;2011年02期
6 祝晓燕;赵冉;朱霄s，
本文编号：2392659
本文链接：https://www.wllwen.com/kejilunwen/sgjslw/2392659.html
