水轮发电机转子通风道堵塞时的耦合场分析
本文选题:全空冷水轮发电机 切入点:转子 出处:《电机与控制学报》2017年01期
【摘要】:为了研究大容量全空冷水轮发电机的通风冷却问题,在考虑转子的旋转情况下,建立了转子风路正常时和转子磁轭通风道口堵塞时的转子三维温度场和流体场耦合计算模型。在转子各磁轭通风道口不同堵塞情况下,采用有限体积法计算分析了全空冷水轮发电机的通风冷却和发热问题。研究了转子风路堵塞时对转子励磁绕组、阻尼绕组和极靴表面的温度影响,以及对磁极间流体的流动形态的影响。当风路正常时,将计算得出的水轮发电机转子励磁绕组平均温度与实测数据进行了对比,经过对比在误差范围内,则验证了计算方法的正确性。
[Abstract]:In order to study the problem of ventilation and cooling of large capacity all-air-cooled hydrogenerator, the rotor rotation is considered. In this paper, the coupling calculation model of rotor three-dimensional temperature field and fluid field is established when the rotor wind path is normal and the rotor yoke is clogged at the ventilation opening. Under the different clogging conditions of the rotor yoke ventilation duct, the coupling calculation model of the rotor three-dimensional temperature field and the fluid field is established. The problems of ventilation cooling and heating of an air-cooled hydrogenerator are calculated and analyzed by finite volume method. The effects of rotor wind path blockage on the surface temperature of rotor excitation winding, damping winding and pole boot are studied. When the wind path is normal, the calculated average temperature of the rotor excitation winding of the hydrogenerator is compared with the measured data, and the comparison is within the error range. The correctness of the calculation method is verified.
【作者单位】: 北京交通大学电气工程学院;哈尔滨工业大学电气工程学院;
【基金】:国家自然科学基金(51477049,51477005)
【分类号】:TM312
【相似文献】
相关期刊论文 前10条
1 李耀军;水轮发电机转子平衡[J];东北电力技术;1995年05期
2 周关炳,覃春柏;二滩电站水轮发电机转子的焊接与组装[J];四川水力发电;2000年S1期
3 金世国;雍口电站水轮发电机转子装配[J];广东水利水电;2002年S1期
4 傅自清;;水轮发电机转子温升的计算及试验[J];东方电机;2002年01期
5 林家洋,林贵海;水轮发电机转子平衡新技术[J];大电机技术;2004年02期
6 高应云;徐学志;胡建文;;冲击式水轮发电机转子平衡技术的改进与应用[J];大电机技术;2006年04期
7 李富营;;水轮发电机转子动态接地故障原因分析及处理[J];水电站机电技术;2007年02期
8 ;水轮发电机转子结构[J];电网与清洁能源;2008年08期
9 林善明;;水轮发电机转子温升计算及测量方法[J];机电信息;2012年18期
10 ;水轮发电机转子多点温度无线电遥测研制成功[J];华东电力;1984年01期
相关会议论文 前5条
1 李富营;;水轮发电机转子动态接地故障原因分析及处理[A];广东省水力发电工程学会论文集[C];2009年
2 李富营;;水轮发电机转子动态接地故障原因分析及处理[A];南方十三省(区、市)水力发电学会秘书长会议论文集[C];2010年
3 傅自清;;水轮发电机转子温升的计算及试验[A];四川省电工技术学会电机专业委员会二○○一年第十三届学术年会论文集[C];2001年
4 赵慧春;李振海;;水轮发电机转子绝缘材料及应用工艺的研究[A];第八届全国绝缘材料与绝缘技术学术会议论文集[C];2002年
5 韩力;范镇南;周光厚;候小全;廖毅刚;;大型水轮发电机转子损耗模型及其对温度场的影响[A];四川省电工技术学会第九届学术年会论文集[C];2008年
相关硕士学位论文 前3条
1 徐进友;水轮发电机转子轴系机电耦联振动研究[D];天津大学;2009年
2 吴振兴;大型水轮发电机转子旋转状态下的流体场与温度场计算[D];哈尔滨理工大学;2012年
3 陈玉红;水轮发电机转子通风冷却系统结构改进的研究[D];哈尔滨理工大学;2012年
,本文编号:1689426
本文链接:https://www.wllwen.com/kejilunwen/shuiwenshuili/1689426.html