光纤端面加工关键技术研究
发布时间：2018-11-09 15:14
【摘要】：通过VB6.0开发上位机的人机控制程序界面,设计一种可以通过可编程多轴控制PMAC的开放式微磨床控制系统。通过对PMAC多轴控制器的硬件构建及运动程序、PLC程序等软件的编写,完成了针对光纤透镜零编程微磨床控制系统开发。
[Abstract]:The man-machine control program interface of upper computer is developed by VB6.0, and an open micro-grinding machine control system is designed, which can control PMAC through programmable multi-axis. Based on the hardware construction and motion program of PMAC multi-axis controller and the programming of PLC program, the control system of micro-grinding machine with zero programming for fiber lens is developed.
【作者单位】： 沈阳理工大学机械工程学院;
【基金】：辽宁省工业攻关计划资助项目(2011220009)
【分类号】：TN253
，
本文编号：2320779
[Abstract]:The man-machine control program interface of upper computer is developed by VB6.0, and an open micro-grinding machine control system is designed, which can control PMAC through programmable multi-axis. Based on the hardware construction and motion program of PMAC multi-axis controller and the programming of PLC program, the control system of micro-grinding machine with zero programming for fiber lens is developed.
【作者单位】： 沈阳理工大学机械工程学院;
【基金】：辽宁省工业攻关计划资助项目(2011220009)
【分类号】：TN253
，
本文编号：2320779
本文链接：https://www.wllwen.com/kejilunwen/wulilw/2320779.html
