某型飞机振动传感器试验器的研制

发布时间：2018-06-15 02:15

本文选题：振动传感器 + 振动台　；参考：《测控技术》2016年12期

【摘要】：为测试某型飞机振动传感器性能,采用背靠背比较法振动测试方法,基于苏试振动台(VT-500)、功率放大器(LA-800)、单轴向电荷输出型加速度标准传感器(Ymc222A25)、电荷放大器(Ymc8102T)、普源信号发生器(DG1032Z)以及研华PCI工控机与A/D板卡(PCI-1716L),搭建振动传感器试验器振动测试平台,以DG1032Z输出作为振动激励信号源,基于VC++6.0开发出信号发生器远程控制与板卡信号采集软件,对试验器的功能进行试验验证,结果表明其有效性。所研制的试验器可实现振动信号源的产生与标准/被测信号的校准,从而为某型飞机振动传感器的测试与修理提供技术支撑。
[Abstract]:In order to test the performance of a certain aircraft vibration sensor, a back to back comparison method is used to test the vibration. Based on the Soviet-test vibration table VT-500, the power amplifier LA-800, the uniaxial charge output acceleration standard sensor Ymc222A25, the charge amplifier Ymc8102T, the general source signal generator DG1032Z), and the ICA PCI industrial control computer and the ArD board card PCI-1716L, the vibration testing platform of the vibration sensor tester is built. Using DG1032Z output as vibration excitation signal source, a signal generator remote control and board signal acquisition software is developed based on VC 6.0. The function of the tester is tested and verified, and the results show that it is effective. The developed tester can generate the vibration signal source and calibrate the standard / measured signal, thus providing technical support for the test and repair of the vibration sensor of a certain aircraft.
【作者单位】：南京航空航天大学自动化学院;中国人民解放军第5720工厂;扬州英迈克测控技术有限公司;
【分类号】：V216.8;TP212

【相似文献】