深圳市制造业碳减排路径研究

发布时间：2018-03-22 13:22

  本文选题：制造业　切入点：减排潜力　出处：《现代管理科学》2016年11期 　论文类型：期刊论文

【摘要】：深圳市制造业碳排放约占当前深圳市排放总量的三分之一,制造业的减排对于全市实现碳排放峰值至关重要。文章以深圳市制造业500家企业调研数据为基础,筛选出57项可实施的节能减排技术,分析这些技术2030年可能的减排潜力和成本。结果表明,2030年57项技术的碳减排潜力约为2 891.3万吨CO2,其对应投资额为582.6亿元。控制管理技术、注塑技术及温控技术三类技术占潜力的三分之二。最后采用最优化数学方法进行建模,探究了深圳市制造业碳减排的最优路径。
[Abstract]:Manufacturing carbon emissions in Shenzhen account for about 1/3 of the total emission in Shenzhen at present, and the emission reduction in manufacturing industry is of great importance to the realization of peak carbon emissions in the whole city. This paper is based on the survey data of 500 manufacturing enterprises in Shenzhen. 57 feasible energy-saving and emission reduction technologies were selected, and the potential and cost of these technologies were analyzed in 2030. The results show that the carbon emission reduction potential of 57 technologies in 2030 is about 2 8.913 million tons of CO2, and the corresponding investment is 58.26 billion yuan. Injection molding technology and temperature control technology account for 2/3 of the potential. Finally, the optimal path of carbon emission reduction in Shenzhen manufacturing industry is explored by using the optimal mathematical method.
【作者单位】： 北京大学深圳研究生院;北京大学深圳研究生院环境与能源学院;
【基金】：重点项目:深圳市环境科研项目(项目号:4403012012000227)
【分类号】：F427
，

本文编号：1648828