面向自动化生产的女衬衫结构方法研究

发布时间：2018-04-17 13:16

本文选题：女衬衫 + 制板方法　；参考：《武汉纺织大学》2017年硕士论文

【摘要】：女衬衫作为女装重要品类之一,受到广泛女性消费者的青睐。随着服装行业的竞争加剧,传统的手工制板方式已经适应不了服装产业的发展,服装样板的自动化、智能化生产将成为服装企业未来的发展趋势。本论文在此背景下,以女衬衫为切入点,探讨能够应用于自动化生产的女衬衫结构设计方法。首先在收集和整理大量文献基础上,对女衬衫衣身造型的分类进行总结。针对女衬衫结构设计方法和国内常用的三种女装原型——日本文化原型、东华原型和刘瑞璞女装基本纸样进行比较分析,确定出以刘瑞璞的第三代女装标准基本纸样为基础,建立女衬衫自动化板型设计的基础——母型。其次,查阅公开发表的服装资料,收集到103个女衬衫板型。运用服装CAD软件,将103个板型进行校板,并对女衬衫板型的数据进行采集、整理,分别建立不同造型女衬衫板型数据库。在对板型数据的描述性统计分析和相关性分析基础上,得到制板变量的控制区间,并进一步进行回归分析,建立了线性回归模型。再次,在女衬衫母型数学模型的基础上,根据前面研究得到的女衬衫结构设计变量的控制区间和线性回归模型,分别建立不同造型,包括X型、H型、A型的制板数学模型,从而得到可以自动生成的女衬衫结构设计方法。最后,对这种新的结构设计方法进行验证,设计不同合体程度和不同造型的女衬衫板型。采用CLO3D虚拟试衣技术和样衣实验对女衬衫板型和造型进行验证,分析这种结构设计方法的合理性、实用性。这种新的制板方法,面向于自动化生产,可以用于快速、自动化地板型设计,为服装的智能化研究和自动化研究,探讨出新的思路。
[Abstract]:Blouses as one of the most important categories of women's wear are favored by a wide range of female consumers.With the aggravation of the competition in the garment industry, the traditional hand-made board method can not adapt to the development of the clothing industry. The automation and intelligent production of the garment sample will become the future development trend of the clothing enterprises.In this paper, the structure design method of blouses which can be applied to automatic production is discussed.Firstly, on the basis of collecting and sorting out a large number of documents, the classification of blouse body shape is summarized.Aiming at the design method of blouse structure and three kinds of women's dress prototypes commonly used in China, Japanese culture prototype, Donghua prototype and Liu Ruipu's basic pattern, it is determined that it is based on Liu Ruipu's standard basic pattern of the third generation women's wear.The base of automatic plate design of blouses-mother type is established.Secondly, check the published clothing information, collect 103 blouses board.Using the clothing CAD software, 103 plates were calibrated, and the data of blouses were collected and sorted, and the database of blouses with different shapes were established.On the basis of descriptive statistical analysis and correlation analysis of plate type data, the control interval of plate making variables is obtained, and further regression analysis is carried out, and a linear regression model is established.Thirdly, on the basis of the mother model of blouse, according to the control interval and linear regression model of the design variable of blouse structure, the mathematical models of different shapes, including X type and H type A type, are established respectively.Thus, the design method of blouse structure can be automatically generated.Finally, the new structure design method is verified, and the blouses with different fit degree and different shape are designed.The CLO3D virtual fitting technique and sample clothing experiment were used to verify the shape and shape of blouses. The rationality and practicability of this structural design method were analyzed.This new board making method, which is oriented to automatic production, can be used in rapid and automatic floor design, and a new way of thinking for the intelligent research and automation research of clothing is discussed.
【学位授予单位】：武汉纺织大学
【学位级别】：硕士
【学位授予年份】：2017
【分类号】：TS941.713

【参考文献】