车轮装饰盖零件的注射成型模拟
发布时间：2019-02-28 19:38
【摘要】：利用Pro/E建立了车轮装饰盖零件的 3D模型 ,并用MoldflowPlasticsInsight软件对其进行流动、保压、冷却和翘曲过程模拟。在数值模拟分析的基础上 ,得到该零件注射成型的可行工艺参数为 :充模时间 0 3 0～ 0 70s、注射压力 75～ 78MPa、锁模力 3 0 0t、注射速率 410cm3/s、注射温度 2 3 0℃、模具温度 60℃、保压压力 62MPa、保压时间10s、冷却时间 2 0～ 3 0s。
[Abstract]:The 3D model of the wheel decorative cover parts was established by Pro/E, and the flow, pressure keeping, cooling and warping process were simulated by MoldflowPlasticsInsight software. On the basis of numerical simulation and analysis, the feasible technological parameters of injection molding were obtained as follows: filling time 0.30 ~ 0.70 s, injection pressure 75 ~ 78 MPA, clamping force 300t, injection rate 410cm3 / s, injection temperature 230 鈩，
本文编号：2432111
[Abstract]:The 3D model of the wheel decorative cover parts was established by Pro/E, and the flow, pressure keeping, cooling and warping process were simulated by MoldflowPlasticsInsight software. On the basis of numerical simulation and analysis, the feasible technological parameters of injection molding were obtained as follows: filling time 0.30 ~ 0.70 s, injection pressure 75 ~ 78 MPA, clamping force 300t, injection rate 410cm3 / s, injection temperature 230 鈩，
本文编号：2432111
本文链接：https://www.wllwen.com/wenyilunwen/shinazhuanghuangshejilunwen/2432111.html
