起吊设备监视系统减振结构设计

发布时间：2018-05-03 01:35

本文选题：减振 + 结构设计　；参考：《机械设计与研究》2016年05期

【摘要】：根据起吊设备实际应用情况,结合振动控制原理,设计了起吊设备监视系统的减振结构——BS组合防振悬挂结构。通过振动分析和计算确定了各元件的参数,并进行了动力学仿真;论文最后对所设计的减振结构进行了振动检测和分析试验。仿真分析及试验结果表明,本文所设计的防振结构,能够很好的适应工程实际中起吊设备监视系统的应用场合,隔振效果良好。
[Abstract]:According to the actual application of the lifting equipment and the principle of vibration control, the vibration damping structure of the monitoring system of the lifting equipment - BS combination anti vibration suspension structure is designed. The parameters of each component are determined by the vibration analysis and calculation, and the dynamic simulation is carried out. Finally, the vibration detection and analysis of the designed damping structure are carried out. The simulation analysis and test results show that the anti vibration structure designed in this paper can be well adapted to the application of the monitoring system of the lifting equipment in the engineering practice, and the vibration isolation effect is good.

【作者单位】：重庆大学机械传动国家重点实验室;三峡大学机械与动力学院;
【基金】：国家自然科学基金资助项目(51105396)
【分类号】：TH21;TB535.1

【相似文献】