基于JIT的装配式建筑FDC阶段供应链集成管理研究

发布时间：2018-01-28 18:32

本文关键词： 装配式建筑 JIT 建筑供应链管理集成管理　出处：《信阳师范学院学报(自然科学版)》2017年03期 　论文类型：期刊论文

【摘要】：从分析装配式建筑的特点及发展现状入手,结合制造业的JIT(Just in time,准时制)理论和供应链理论,构建了基于JIT的装配式建筑供应链集成管理理论模型.重点针对FDC(Fabrication-Distribution-Construction,预制、配送、施工)阶段,构建了JIT模式下承包商和建筑构件供应商的最优订货供货模型,与传统的经济订货批量模型进行对比,推导出JIT模式下能够降低供应链总成本、减少承包商订货成本、改善现场施工环境、提高构件供应商利润的参数适用条件,并结合实际案例进行验证.最后对单一的一对一供应链进行优化和改善,建立一个构件供应商对多个承包商的供应链管理理论模型,并分析了进一步优化的潜在空间.
[Abstract]:Based on the analysis of the characteristics and development status of prefabricated buildings, this paper combines the theory of JIT(Just in time and supply chain theory of manufacturing industry. The theoretical model of integrated management of assembly building supply chain based on JIT is constructed. Fabrication-Distribution-Construction. In the prefabrication, distribution, construction) stage, the optimal ordering and supply model of contractor and building component supplier under JIT mode is constructed, and compared with the traditional economic order batch model. The paper deduces the parameter applicable conditions of JIT mode, which can reduce the total cost of supply chain, reduce the order cost of contractor, improve the construction environment on site and increase the profit of component supplier. Finally, the single one-to-one supply chain is optimized and improved, and the supply chain management theory model of a component supplier to multiple contractors is established. The potential space for further optimization is analyzed.
【作者单位】：皖西学院建筑与土木工程学院;
【基金】：安徽省自然科学研究重点项目(KJ2016A748) 皖西学院校级自然科学研究重点项目(WXZR201707)
【分类号】：F426.92;TU756
【正文快照】： 0引言装配式建筑通过工厂预制部品构件,现场机械化组装,将传统的施工“建造”变为机械化“制造”,能大幅度提高工程质量,优化作业流程和社会分工,提高劳动效率,缩短工期,改善现场环境,减少环境负担;同时将传统作业工人由“农民工”变成“产业工人”,能大幅度提高工人素质,节约

【参考文献】