当前位置:主页 > 管理论文 > 会展论文 >

建筑设备管理系统及其集成研究与设计

发布时间:2019-01-07 18:01
【摘要】:近年来,建筑物内的设备越来越多,这些设备实现功能越来越复杂,控制要求也越来越高。这些设备有中央空调设备、给排水设备、电(扶)梯、照明设备、电力设备等。深入研究这些设备运行的基本原理,设计可靠、合理的控制逻辑,并在实现单个设备控制的基础上实现组网、集成的控制与管理成为现代建筑内设备管理系统的必然。本文以泰山会展中心项目设备管理系统为背景,对不同的设备特别是中央空调设备的控制方式、控制逻辑进行了深入的研究,并设计了泰山会展中心设备管理系统及其集成。本文的主要研究内容如下: 1)根据建筑内不同设备控制特点,,对建筑内设备管理进行子系统划分与构建,并基于各个子系统实现建筑设备管理的集成系统进行了整体架构设计。 2)对各种现场总线技术在建筑领域的应用进行深入研究。 3)建筑内主要设备的运行原理分析与控制逻辑设计。 4)建筑设备管理系统的集成技术研究与设计。 本文共五章。 第一章绪论。介绍了建筑设备管理系统的概念及其发展,课题研究的工程背景、研究现状和关键技术问题以及本文研究的主要内容。 第二章建筑设备管理系统架构设计。研究了建筑设备的控制功能要求,针对不同类型的设备的特点进行子系统划分;并进一步研究了设备管理系统集成的基本架构;详细的介绍了建筑设备监控领域最具前途的BACnet协议及BACnet协议在泰山会展中心智能化项目中的应用。 第三章建筑设备管理系统设计。详细介绍了中央空调设备、给排水设备、送/排风设备等设备的具体控制设计。并对控制系统进行架构设计,硬件及软件组态设计内容。 第四章建筑设备管理系统的集成设计。详细介绍了智能建筑中用到的各种集成模式及集成技术选用,并具体设计了泰山会展中心项目的集成设计内容。 第五章结束语。为本文的总结,对建筑设备管理系统控制逻辑设计、控制系统构建及集成设计进行了总结,并对建筑设备管理系统的技术发展作了展望。
[Abstract]:In recent years, there are more and more equipments in buildings. The functions of these devices are becoming more and more complex, and the control requirements are becoming higher and higher. These equipment include central air-conditioning equipment, water supply and drainage equipment, electric ladder, lighting equipment, electrical equipment and so on. It is inevitable for modern building equipment management system to study the basic principle of these equipment operation, design reliable and reasonable control logic, and realize networking on the basis of realizing single equipment control. The integrated control and management become the necessity of modern building equipment management system. Based on the project equipment management system of Taishan Convention and Exhibition Center, this paper studies the control logic of different equipments, especially the central air-conditioning equipment, and designs the equipment management system and its integration of Taishan Convention and Exhibition Center. The main contents of this paper are as follows: 1) according to the control characteristics of different equipment in the building, the sub-system of equipment management in the building is divided and constructed. The integrated system of building equipment management based on each subsystem is designed. 2) deeply study the application of various fieldbus technology in the field of architecture. 3) the operation principle analysis and control logic design of the main equipment in the building. 4) Research and design of integrated technology of building equipment management system. There are five chapters in this paper. The first chapter is introduction. This paper introduces the concept and development of construction equipment management system, the engineering background of the subject, the research status and key technical problems, and the main contents of this paper. The second chapter is the architecture design of construction equipment management system. The control function requirements of construction equipment are studied, and the subsystems are divided according to the characteristics of different types of equipment, and the basic framework of equipment management system integration is further studied. The application of BACnet protocol and BACnet protocol in the intelligent project of Taishan Convention and Exhibition Center is introduced in detail. The third chapter is the design of construction equipment management system. The control design of central air conditioning equipment, water supply and drainage equipment and air supply / exhaust equipment are introduced in detail. And the control system architecture design, hardware and software configuration design content. The fourth chapter is the integrated design of building equipment management system. This paper introduces in detail the various integration modes and the selection of integration technology used in intelligent building, and designs the integrated design content of Taishan Exhibition Center project in detail. The conclusion of chapter five. For the summary of this paper, the control logic design, control system construction and integrated design of building equipment management system are summarized, and the technical development of building equipment management system is prospected.
【学位授予单位】:华南理工大学
【学位级别】:硕士
【学位授予年份】:2011
【分类号】:TP311.52

【共引文献】

相关期刊论文 前10条

1 李章媛,李松;控制系统在暖通空调上的应用[J];企业技术开发;2002年01期

2 王波;唐世建;万世华;张宏乐;;高空台抽气系统补气量的PLC数字PID控制[J];燃气涡轮试验与研究;2010年04期

3 张祖刚;傅成华;项颢;李晓;张晨光;;基于Modbus协议的第三方设备与EBI的集成[J];四川理工学院学报(自然科学版);2008年05期

4 王翠华,戴玉龙;变频中央空调房间温度的智能控制[J];山东理工大学学报(自然科学版);2004年01期

5 李慧,段晨旭;变风量空调系统末端装置的性能分析[J];山东建筑工程学院学报;2005年01期

6 李锋博;王娜;谭伟;赵学风;;建筑设备监控实验系统的研究与开发——“建筑智能化系统专业教学综合实验创新基地的研究与实践”之一[J];山东建筑大学学报;2006年05期

7 许保彬;;DDC在纺织空调温湿度控制系统中的综合应用[J];上海纺织科技;2008年08期

8 王微伶;韩贵红;;智能建筑信息系统集成[J];上海应用技术学院学报(自然科学版);2005年02期

9 沈园云;;上海南桥商业广场ABBI-bus智能照明控制系统的应用[J];上海应用技术学院学报(自然科学版);2010年02期

10 吕岗;薛元生;;电力线载波通信技术在楼宇智能监控中的应用[J];苏州大学学报(工科版);2006年06期

相关会议论文 前10条

1 卢永梅;黄翔;强天伟;;基于WINCC的蒸发冷却空调监控系统的研究[A];中国建筑学会建筑热能动力分会第十六届学术交流大会论文集[C];2009年

2 王卓;王珍涛;周志雄;;KY-310B型牙轮钻机自动化进展述评[A];矿山企业节能减排与循环经济高峰论坛论文集[C];2010年

3 陈西虎;;智能化控制系统在铁路车站节能中的应用[A];节能环保 和谐发展——2007中国科协年会论文集(一)[C];2007年

4 裴秀英;林立;;厦门某大厦空调新风系统的自动化改进设计[A];第三届海峡两岸土木建筑学术研讨会论文集[C];2007年

5 李正军;李国强;韩修恒;;健身器材手握式电子心率计的研制[A];第十七届全国测控计量仪器仪表学术年会(MCMI'2007)论文集(下册)[C];2007年

6 许毅;;浅谈智能建筑系统集成技术[A];第二十届中国(天津)'2006IT、网络、信息技术、电子、仪器仪表创新学术会议论文集[C];2006年

7 张大镇;强天伟;黄翔;文力;;关于空调自动控制系统中调节阀选型的探讨[A];第一届中国(西安)采暖通风、制冷空调节能减排技术研讨会论文集[C];2009年

8 强天伟;黄翔;武俊梅;;某大厦中央空调自控系统设计(西门子楼宇自控)[A];第一届中国(西安)采暖通风、制冷空调节能减排技术研讨会论文集[C];2009年

9 苏玮;刘莹;薛立军;;基于EBI的智能建筑系统集成软件接口技术的研究及应用[A];2008中国仪器仪表与测控技术进展大会论文集(Ⅰ)[C];2008年

10 许保彬;;DDC在纺织空调温湿度控制系统中的综合应用[A];2009'全国纺织空调除尘新技术及应用研讨会论文集[C];2009年

相关博士学位论文 前10条

1 胡慧;不确定非线性系统神经网络自适应跟踪控制[D];湖南大学;2010年

2 石磊;基于负荷预测在线修正的冰蓄冷空调系统优化运行研究[D];西安建筑科技大学;2002年

3 谌玉红;人体—服装—环境系统热湿传递特性及测试与评价方法研究[D];中国人民解放军军事医学科学院;2006年

4 强天伟;通风空调设备用蒸发冷却节能技术的研究[D];东华大学;2006年

5 杨秀建;极限工况下汽车转向失稳的非线性动力学特性与主动控制研究[D];山东大学;2009年

6 贾传宝;受控脉冲穿孔等离子弧焊接控制系统的研究[D];山东大学;2009年

7 孙宗耀;高阶不确定非线性系统的控制设计和性能分析[D];山东大学;2009年

8 丁信忠;基于工业以太网的总线型交流伺服系统关键技术研究[D];山东大学;2012年

9 张健;多类不确定非线性系统全局自适应稳定控制设计[D];山东大学;2012年

10 吴长水;电控单体泵系统及实时控制软件研究[D];上海交通大学;2009年

相关硕士学位论文 前10条

1 曾凡菊;弹道修正弹电动舵机控制系统的设计[D];沈阳理工大学;2010年

2 高芳红;基于S7-300的螺旋焊管生产线递送自动控制系统的设计[D];山东大学;2010年

3 卢秋实;集中供热控制系统的研究与应用[D];沈阳建筑大学;2011年

4 付纳科;阵列光收发模块温度控制系统的研究[D];电子科技大学;2011年

5 何雅静;两轮自平衡小车变结构控制性能改进的研究[D];西安电子科技大学;2011年

6 孙可;基于PLC的医院洁净手术室净化空调自动控制系统的设计与实现[D];沈阳师范大学;2011年

7 宁涛;基于混合动力的液压挖掘机动臂势能回收系统研究[D];吉林大学;2011年

8 石\~;微小型无人机电机驱动设计及飞行姿态仿真[D];北京交通大学;2011年

9 陆世辉;基于ADP的通用智能嵌入式控制器设计及实现[D];武汉理工大学;2011年

10 栾世晗;非线性时滞系统输出反馈控制[D];曲阜师范大学;2011年



本文编号:2403963

资料下载
论文发表

本文链接:https://www.wllwen.com/guanlilunwen/huizhanguanlilunwen/2403963.html


Copyright(c)文论论文网All Rights Reserved | 网站地图 |

版权申明:资料由用户a36c0***提供,本站仅收录摘要或目录,作者需要删除请E-mail邮箱bigeng88@qq.com