低碳约束下木材加工业全要素生产率研究

发布时间：2018-05-08 07:52

本文选题：碳排放 + DEA-Malmquist指数　；参考：《林业经济问题》2015年04期

【摘要】：在考虑碳排放的基础上运用DEA-Malmquist指数测算了13个国家木材加工业的全要素生产率。对比分析1995~2009年发达国家与发展中国家木材加工业全要素生产率的发展变化情况。研究发现:总体而言,考虑CO2排放的木材加工业全要素生产率要高于传统全要素生产率,技术进步是全要素生产率增长的主要原因。低碳约束前后发达国家木材加工业全要素生产率平均水平要高于发展中国家。从1995年到2009年由于技术进步指数的变化引起了中国木材加工业全要素生产率较大的波动。根据实证分析结论,提出适当调整产业规模、提高产业技术创新水平等建议。
[Abstract]:The total factor productivity (TFP) of wood processing industry in 13 countries was measured by DEA-Malmquist index on the basis of carbon emission. The development and change of total factor productivity (TFP) of wood processing industry in developed and developing countries from 1995 to 2009 were compared and analyzed. It is found that the total factor productivity (TFP) of wood processing industry considering CO2 emissions is higher than that of traditional TFP, and technological progress is the main reason for TFP growth. The average level of total factor productivity of wood processing industry in developed countries is higher than that in developing countries before and after low carbon restraint. From 1995 to 2009, the total factor productivity (TFP) of Chinese wood processing industry fluctuated greatly due to the change of technological progress index. According to the conclusion of empirical analysis, some suggestions are put forward, such as adjusting the industrial scale and improving the level of industrial technological innovation.
【作者单位】：福建农林大学管理学院;
【基金】：国家社会科学基金资助项目(11BJY115)
【分类号】：F416.88;F224

【参考文献】