3D混凝土打印技术现状及发展前景
发布时间：2019-07-11 18:51
【摘要】：钢筋混凝土被大量用于永久性结构,如:码头、堤防护岸、挡土墙、防波堤等。施工过程中需要支模、拆模等一系列繁琐程序,施工工期长、材料浪费、耗能大,施工困难,而3D混凝土打印技术不需要支模、拆模等一系列繁琐程序,制造时间降低1/10~1/5,费用降低到1/3左右,相对于传统方式具有价格低、耗能小、绿色环保、高效、安全等优点。3D混凝土打印技术在大型工程施工领域还处于实验研究阶段,但非常具有研究价值。虽然我国3D混凝土打印技术处于起步阶段,但随着3D混凝土打印技术的快速发展,不久的将来,3D混凝土打印技术将成为现实,3D混凝土打印将会给工程施工带来巨大变革。
[Abstract]:Reinforced concrete is widely used in permanent structures, such as wharf, embankment, retaining wall, breakwater and so on. In the construction process, a series of tedious procedures, such as formwork support, mold removal and so on, are needed, such as long construction period, waste of materials, high energy consumption and difficult construction, while 3D concrete printing technology does not need a series of tedious procedures, such as mould support, mold removal and so on. The manufacturing time is reduced by 1: 10 鈮，
本文编号：2513393
[Abstract]:Reinforced concrete is widely used in permanent structures, such as wharf, embankment, retaining wall, breakwater and so on. In the construction process, a series of tedious procedures, such as formwork support, mold removal and so on, are needed, such as long construction period, waste of materials, high energy consumption and difficult construction, while 3D concrete printing technology does not need a series of tedious procedures, such as mould support, mold removal and so on. The manufacturing time is reduced by 1: 10 鈮，
本文编号：2513393
本文链接：https://www.wllwen.com/jingjilunwen/jianzhujingjilunwen/2513393.html
