交替矩形窗口导控激振阀的设计
发布时间：2018-12-25 20:22
【摘要】：本研究提出交替矩形窗口导控激振阀的创新设计,该阀由阀体、阀芯、齿轮机构、步进电机等组成,步进电机通过齿轮驱动阀芯旋转,阀芯凸肩上交替矩形窗口机构控制阀芯左右两端压力腔的压力交替变化,驱动阀芯轴向往复运动,控制阀进油口与两控制口交替通断,驱动油缸活塞左右运动产生激振。
[Abstract]:In this study, the innovative design of alternating rectangular window guided vibration valve is proposed. The valve is composed of valve body, valve core, gear mechanism, step motor and so on. The alternating rectangular window mechanism on the convex shoulder of the valve core controls the pressure alternation between the right and left ends of the valve core, drives the valve core axial reciprocating motion, controls the valve inlet and the two control ports alternately breaks, and drives the piston of the cylinder to move left and right to produce exciting vibration.
【作者单位】： 衢州学院机械工程学院;
【基金】：浙江省大学生新苗计划项目(2015R429005)资助
【分类号】：TH134
[Abstract]:In this study, the innovative design of alternating rectangular window guided vibration valve is proposed. The valve is composed of valve body, valve core, gear mechanism, step motor and so on. The alternating rectangular window mechanism on the convex shoulder of the valve core controls the pressure alternation between the right and left ends of the valve core, drives the valve core axial reciprocating motion, controls the valve inlet and the two control ports alternately breaks, and drives the piston of the cylinder to move left and right to produce exciting vibration.
【作者单位】： 衢州学院机械工程学院;
【基金】：浙江省大学生新苗计划项目(2015R429005)资助
【分类号】：TH134
【参考文献】
相关期刊论文 前5条
1 贾文昂;阮健;李胜;裴翔;俞浙青;朱发明;;电液四轴高频结构强度疲劳试验系统[J];振动与冲击;2010年05期
2 褚衍清;张忠伟;余亚超;阮健;;电液伺服地震体验系统设计[J];浙江工业大学学报;2009年05期
3 史亮;苏嵩;高敬成;罗蓓蓓;李晓涛;;2.5×2.5米二维液压振动台系统设计[J];液压与气动;2007年10期
4 严侠;朱长春;胡勇;;三轴六自由度液压振动台系统建模研究[J];机床与液压;2006年11期
5 宋琼;刘志勇;蒋宁;;HS-10T液压振动台自激振荡现象分析及解决办法[J];机床与液压;2006年07期
【共引文献】
相关期刊论文 前10条
1 朱，
本文编号：2391599
本文链接：https://www.wllwen.com/jixiegongchenglunwen/2391599.html
