基于自研芯片的FC-ASM仿真卡设计与实现

发布时间：2018-03-10 06:11

本文选题：FC-AE-ASM　切入点：SoC　出处：《电子技术应用》2016年09期 　论文类型：期刊论文

【摘要】：随着航空电子技术的发展,不断提高产品的可靠性,减小系统的重量、体积、功耗等,已成为目前设计的一种趋势。但传统FC-ASM仿真卡都是以FPGA方式实现,其板面积大、功耗极高、可靠性低、通用性差,已不能满足系统小型化高可靠性的要求。提出了一种基于自研芯片的FC-ASM仿真卡实现方案。该方案设计灵活简单,集成了FC-AE-ASM协议通信、设备管理、时统管理、网络管理等功能,同时以其功耗低、成本小和重量轻等优势,现被广泛应用于地面仿真设备和实验室环境中。
[Abstract]:With the development of avionics technology, it has become a trend to improve the reliability of the product and reduce the weight, volume and power consumption of the system. However, the traditional FC-ASM simulation card is realized by FPGA, and its board area is large. Because of its high power consumption, low reliability and poor versatility, it can no longer meet the requirement of miniaturization and high reliability of the system. A scheme of FC-ASM simulation card based on self-developed chip is proposed. The design of the scheme is flexible and simple, and the communication of FC-AE-ASM protocol is integrated. With the advantages of low power consumption, low cost and light weight, equipment management, timing management, network management and other functions are widely used in ground simulation equipment and laboratory environment.
【作者单位】：中航工业西安航空计算技术研究所;集成电路与微系统设计航空科技重点实验室;西安翔腾微电子科技有限公司;
【基金】：航空科学基金(2015ZC51036) 中国航空工业集团公司创新基金(2010BD63111)
【分类号】：V243.1

【相似文献】