T形管导流块安装位置的一种近似计算方法

发布时间：2018-06-20 09:20

  本文选题：T形管 + 导流块　； 参考：《机床与液压》2016年20期

【摘要】：T形管用于某飞机防冰系统,在T形管(三通)处高温空气分成两路,分别从两出口流出,两路流量比例为4∶1。通过计算分析确定T形管导流块的近似安装位置,并通过试验验证其合理性,对同类形T形管导流块的设计起到一定指导作用。
[Abstract]:The T-pipe is used in the anti-ice system of an aircraft. The high-temperature air at the T-pipe (three-way) is divided into two channels, which flow out from two exits respectively, with a flow ratio of 4: 1. The approximate installation position of T-shaped tube diversion block is determined by calculation and analysis, and its rationality is verified by experiment, which plays a guiding role in the design of similar T-tube diversion block.
【作者单位】： 空军驻新乡地区军事代表室;
【分类号】：V244.15
，

本文编号：2043774