连续梁桥动静载试验及其有限元分析
发布时间:2018-01-15 14:02
本文关键词:连续梁桥动静载试验及其有限元分析 出处:《辽宁工程技术大学》2014年硕士论文 论文类型:学位论文
【摘要】:首先对动、静载试验相关理论进行了归纳总结,说明了桥梁动、静载试验根据规范要求所进行的结果评定的过程。然后以大连市202线延伸工程中的一段一联单跨连续桥梁为工程背景,对连续梁进行动静荷载试验,测定桥梁的控制界面的挠度和应变,以及桥梁结构的振动响应和基本频率,同时在静载试验有限元分析中,运用有限元软件Midas/Civil建立连续梁桥的三维有限元模型,分析连续梁桥的加载荷载,利用Midas/Civil中的移动荷载追踪模块计算加载移动荷载的等效静荷载,应用得出的桥梁加载静荷载对连续梁桥进行模拟分析,在分析的过程中,针对每一跨分析每一跨的控制截面在加载荷载的作用下的挠度变形和内力值,以此指导桥梁静载试验。在动荷载有限元分析中,利用Midas/Civil时程分析,得到桥梁控制截面的位移与内力的时程曲线,利用得出的结果与动载试验进行对比,确定桥梁的动力特性是否符合要求。最终,评定了桥梁的工作状态。
[Abstract]:Firstly, the related theories of dynamic and static load test are summarized, and the bridge motion is explained. Static load test according to the requirements of the code for the results of the evaluation process. Then taking a section of a single span continuous bridge in Dalian 202 extension project as the engineering background the dynamic and static load test of continuous beam is carried out. The deflection and strain of the control interface of the bridge, the vibration response and the basic frequency of the bridge structure were measured. At the same time, the finite element analysis of the static load test was carried out. The three-dimensional finite element model of continuous beam bridge is established by using finite element software Midas/Civil, and the loading load of continuous beam bridge is analyzed. Using the moving load tracing module in Midas/Civil to calculate the equivalent static load of the loading moving load, the bridge loading static load is used to simulate and analyze the continuous beam bridge, and in the process of analysis. Aiming at the deflection and internal force of the control section of each span under the action of loading load, the deflection and internal force of each span are analyzed to guide the static load test of the bridge, which is used in the finite element analysis of dynamic load. Using Midas/Civil time-history analysis, the time-history curves of the displacement and internal force of the bridge control section are obtained, and the results obtained are compared with the dynamic load test. Determine whether the dynamic characteristics of the bridge meet the requirements. Finally, the bridge's working state is evaluated.
【学位授予单位】:辽宁工程技术大学
【学位级别】:硕士
【学位授予年份】:2014
【分类号】:U446.1
【参考文献】
相关期刊论文 前10条
1 许肇峰;王强;;桥梁评估方法的研究现状与发展[J];四川建筑;2008年04期
2 吴腾;葛耀君;熊洁;叶小萍;;我国公路桥梁汽车荷载演变与比较[J];上海公路;2007年01期
3 韩富庆;;连续梁桥静载作用下参数分析[J];中外公路;2006年06期
4 胡胜来;郑国华;刁荣亭;;超重车辆运输中桥梁承载能力的评估[J];工程建设与档案;2005年06期
5 章日凯;王常青;;桥梁荷载试验[J];交通标准化;2005年12期
6 王解军,张伟,吴卫祥;重型汽车荷载作用下简支梁桥的动力反应分析[J];中南公路工程;2005年02期
7 司奎,史家钧;基于可靠性的桥梁评估方法[J];山西建筑;2005年05期
8 郭爱平,赖敏芝;桥梁荷载试验静动力分析系统[J];中外公路;2004年05期
9 张永清,冯忠居;用层次分析法评价桥梁的安全性[J];西安公路交通大学学报;2001年03期
10 张启伟,范立础;利用动静力测量数据的桥梁结构损伤识别[J];同济大学学报(自然科学版);1998年05期
相关硕士学位论文 前2条
1 余华丽;既有桥梁的检测与评估[D];西南交通大学;2010年
2 姜阿娟;大跨径连续梁桥动静载试验研究[D];山东大学;2008年
,本文编号:1428649
本文链接:https://www.wllwen.com/kejilunwen/jiaotonggongchenglunwen/1428649.html