机电一体化设备材料304不锈钢微观组织和力学性能研究

发布时间：2018-12-16 16:35

【摘要】：以机电一体化设备材料304奥氏体不锈钢为研究对象,对其在不同热处理下的微观组织和力学性能进行研究。结果表明:不锈钢为单相奥氏体组织,基材晶粒粗大且其大小长短极其不均匀;经过冷轧处理,其微观组织晶粒大小很不均匀,分布紊乱;700℃保温5h退火处理,晶粒大小略微均匀;800℃时效2h,晶粒大小比较细小、均匀;随着温度升高,铁素体相质量分数下降,奥氏体相质量分数逐渐升高;随退火温度升高和时效时间延长,不锈钢显微硬度和抗拉强度逐渐降低,适量缩短固溶时间可以提高不锈钢的力学性能。
[Abstract]:The microstructure and mechanical properties of 304 austenitic stainless steel under different heat treatment were studied. The results show that the microstructure of stainless steel is single phase austenitic structure, the grain size of the substrate is coarse and its size is extremely uneven, and after cold rolling, the grain size of the stainless steel is very uneven and its distribution is disordered. After annealing at 700 鈩，

本文编号：2382703