基于ARM和FPGA的1553B总线设备检测系统的设计

发布时间：2018-03-10 03:16

本文选题：ARM　切入点：FPGA　出处：《计算机工程与科学》2014年06期 　论文类型：期刊论文

【摘要】：1553B总线在军事领域应用非常广泛,目前针对1553B总线设备的检测系统并不能完全满足实际应用需求。为使计算机与1553B总线设备的数据通信更加方便,提高总线设备检测效率,基于ARM和FPGA设计了一种1553B总线设备检测系统。首先给出了系统的总体设计框架,详细介绍了硬件设计和软件设计方法。设计时采用了模块化的方法,对ARM模块、FPGA模块及接口连接部分进行分别设计。ARM模块实现了USB和以太网双接口。用FPGA设计1553B协议IP核采用自顶向下的方法。同时,也对外围电路和电源模块进行了优化设计。完成设计后进行了仿真验证,结果表明设计实现了接收与发送功能,符合设计要求。最后,在电路板上进行了实际调试,测试取得了良好的效果,能够满足实际应用要求。
[Abstract]:1553B bus is widely used in military field. The detection system for 1553B bus equipment can not completely meet the actual application requirement. In order to make the data communication between computer and 1553B bus equipment more convenient and improve the detection efficiency of bus equipment, Based on ARM and FPGA, a 1553B bus device detection system is designed. Firstly, the overall design framework of the system is given, and the hardware and software design methods are introduced in detail. The ARM module and the interface connection part are designed. Arm module realizes the dual interface of USB and Ethernet. The IP core of 1553B protocol is designed with FPGA. At the same time, the top-down method is used to design the IP core of 1553B protocol. The peripheral circuit and power module are also optimized. The simulation results show that the design realizes the functions of receiving and transmitting, and meets the design requirements. Finally, the actual debugging is carried out on the circuit board. The test has achieved good results and can meet the practical application requirements.
【作者单位】：空军工程大学航空航天工程学院;
【基金】：国家自然科学基金资助项目(61175029,61203268) 国防科技重点实验室基金资助项目(9140C610301080C6106,9140C6001070801) 航空科学基金资助项目(20101996009)
【分类号】：TP274;TP336

【参考文献】