浅析印后设备的数字化和智能化

发布时间：2018-08-24 20:47

【摘要】：正今年笔者有幸参观了四年一届的德鲁巴展会,发现本次展会涌现出了很多新技术和新装备,印后方面尤其突出。亮点一是应用型印后小型设备除去了半自动化的配置,自动化程度明显提高;亮点二是完全数字化生产方式的印后设备品类和品牌都在增加,激光模切机、数字模切压痕平台、数字UV印刷机以及数字冷烫设备都至少有3个品牌分布在展会里,也吸引了大量的眼球,这些设备自动化程度高,发展方向是无版化印后生产;亮点三是印后设备引入大量感知检测机构和控制系统,智能化水平也有大幅提升;亮点四是适合一个产品起做、个个不同的印后设备联线化初现。本文就印后设备的数字化和智能化谈谈自己的一些浅见。
[Abstract]:This year, I had the honor to visit the Druba Exhibition once every four years and found that a lot of new technologies and equipment emerged in this exhibition, especially after printing. One bright spot is that the application type of small post-press equipment has removed the semi-automatic configuration, and the degree of automation has been improved significantly; the second bright spot is the increase in the categories and brands of post-press equipment in the complete digital production mode, laser die-cutting machines, digital die-cutting indentation platforms, Digital UV printing machines and digital cold ironing equipment are at least 3 brands in the exhibition, also attracted a large number of eyeballs, these devices are highly automated, the development direction is no version of the post-press production; The third is the introduction of a large number of post-press equipment sensing detection institutions and control systems, the level of intelligence has also been greatly improved; fourth, the highlight is suitable for a product to do, each of the different post-press equipment line. This article on the digital and intelligent after printing equipment to talk about their own some superficial views.
【作者单位】：上海悠印数码科技有限公司;
【分类号】：TS885

【相似文献】