基于达索3D体验平台的BIM技术在斜拉桥锚槽设计中的应用

发布时间：2018-04-09 14:49

  本文选题：BIM　切入点：达索　出处：《结构工程师》2017年02期

【摘要】：为了精确、高效地完成某独塔斜拉桥拉索梁端锚槽及其内嵌钢板的尺寸设计,适应拉索数量众多且在设计过程中梁端倾角变化频繁的情况,借助达索3D体验平台采用BIM技术中的"骨架-模板"方法,先后完成用于定位锚槽的"骨架"和带有所需数据参数的"模板"模型,在建立锚槽及其内嵌钢板的三维模型的同时,批量化输出设计所需几何尺寸。结果表明:这种方法与传统设计手段相比,能够显著提高设计的精确性和效率,由于达索软件具有模板重用和参数化的特点,本项目建立的模板和骨架同样能够用于其他类似项目当中。
[Abstract]:In order to accurately and efficiently complete the dimension design of the cable end anchor slot and its embedded steel plate of a single tower cable-stayed bridge, it adapts to the situation that the number of cables is numerous and the inclination angle of the end of the beam changes frequently during the design process.With the help of Dassault 3D experience platform, the "skeleton" and the "template" model with the required data parameters are successively completed by using the "skeleton" method in BIM technology, which is used to locate the anchor slot.At the same time, the 3D model of the anchor slot and its embedded steel plate is established, and the geometric dimensions required for the output design are also measured.The results show that compared with the traditional design method, this method can significantly improve the accuracy and efficiency of the design, because the Dasso software has the characteristics of template reuse and parameterization.The template and skeleton created by this project can also be used in other similar projects.
【作者单位】： 铁道第三勘察设计院集团有限公司桥梁处;
【分类号】：U448.27
，

本文编号：1726889