电镀工艺参数，中文例句，英文例句

  本文关键词：化学镀锡工艺参数对沉积速率、镀层厚度及表面形貌的影响，，由笔耕文化传播整理发布。

1.

Influence of plating technic parameters on tensile strength of nickel foam

电镀工艺参数对泡沫镍抗拉强度的影响

2.

Effects of process parameters on the textures of tungsten coatings electrodeposited from Na_2WO_4-WO_3-ZnO molten salts

双向脉冲电镀工艺参数对Na_2WO_4-ZnO-WO_3熔盐镀钨层织构的影响

3.

Effect of Plating Parameters on Plating Rate and Thickness as well as Surface Morphology of Electroless Tin Coating

化学镀锡工艺参数对沉积速率、镀层厚度及表面形貌的影响

4.

Effect of Process Parameters on Deposition Rate of Electroless Nickel Plating on Zinc Alloy

工艺参数对锌合金表面化学镀镍速率的影响

5.

Effects of Processing Parameters on Microstructure and Properties of 800 MPa Hot Dip Galvanized Dual Phase Steel

工艺参数对800MPa热镀锌双相钢组织性能的影响

6.

electrochemical etching and replating process

电化腐蚀和电镀工艺

7.

Electroplating process for the die made of Al is presented.

介绍了铰刀制造过程中，在铝质胎具内孔电镀的工艺过程和部分参数。

8.

Study on the Effects of Surface Pretreatment and Electronic Parameters on Micro-arc Oxidation Film on Thixoformed AZ91D Magnesium Alloy, and Chemical Plating Technique;

触变成形AZ91D镁合金表面预处理、电参数对微弧氧化膜的影响及化学镀工艺的研究

9.

Study on Iron Electroplating and Fe-SiC Composite Electroplating Technics;

电镀铁及Fe-SiC复合电镀工艺的研究

10.

Micro-via Filling and Through Hole Plating in one Process in Vertical Line

垂直电镀线盲孔和通孔同步电镀工艺

11.

Reliability of plated through hole (PTH) has close relationship with technology parameters during manufacture process.

镀通孔的可靠性与制造过程工艺参数有非常密切的关系。

12.

Study on Processing Parameters, Morphologies and Deposition Principle of Electroless Plating Nanocrystalline Copper;

化学镀纳米铜膜的工艺参数和表面形貌及沉积原理研究

13.

Effect of Processing Parameters on Microstructure and Properties of Steel-based Chromium Plating

工艺参数对钢基镀硬铬层微结构与性能的影响(英文)

14.

Numerical optimization of technical parameters of EMC of aluminum thin strip

铝薄板电磁铸造工艺参数的数值优化

15.

Optimization of machining parameters of EDM and its applications

电火花加工工艺参数的优化及其应用

16.

A Syudy on Ecm Database of Operating Parameter and Basic Process Law of Ecm

电解加工工艺参数数据库及电解加工基本工艺规律研究

17.

Parameter Optimization of the Composite Electro-brush with Nanomaterial and the Performance of Composite Coating;

纳米复合电刷镀参数优化及镀层性能研究

18.

Investigation of Underwater Arc Cutting and Its Technological Parameters

水下电弧切割现象和工艺参数的研究

  本文关键词：化学镀锡工艺参数对沉积速率、镀层厚度及表面形貌的影响，由笔耕文化传播整理发布。