end cutters 的翻译结果

  本文关键词：基于五轴数控磨床加工的球头立铣刀数学模型及仿真研究，由笔耕文化传播整理发布。

 在分类学科中查询

所有学科

金属学及金属工艺

自动化技术

ball-end cutters

     The Research on Simulation and Mathematical Model of Ball-end Cutters Based on Five-axis Numerial Control Grinder

     基于五轴数控磨床加工的球头立铣刀数学模型及仿真研究

短句来源

     In this thesis, a internal and external analyse and research about design, modeling and machining of ball-end cutters is reviewed. On the base of grinding trait of MK6335A five-axis numerical control drill grinder, in the present study, differential geometry, ruled surface concept,envelope and inverse-envelope theory, coodinate transfer and numeric analyse are used to develop a mathmatical model and systematic method for the design, analyse and simulation of ball-end cutters.

     本论文在国内外关于球头立铣刀设计、建模、加工等方面研究的基础上,根据现有的MK6335A五轴数控钻尖磨床刃磨运动的特点,应用微分几何、包络与反包络理论、坐标转换、数值分析等理论知识,研究了基于五轴数控磨床加工球头立铣刀的数学模型及分析与仿真。

短句来源

     Firstly, the traditional cutting-edge models with constant helix angle of ball-end cutters are analyzed and the befitting normal helix models are proposed , and helical peculiarities of them are analyzed by definition of helix angle.

     首先,本文对传统的等螺旋角的球头立铣刀刃口曲线的模型进行了分析,建立了正交螺旋线的刃口曲线模型,并运用螺旋角的定义分析了该刃口曲线的特点。

短句来源

     Finally, acoording to design ideology of software, based on VC++ software platform, made use of COM component of MATLAB and OpenGL control technique, various mathematical model are analyzed visually, and three dimensions simulatioan of ball-end cutters are realized.

     最后,本文应用软件设计思想,以VC++6.0为软件平台,利用MATLAB的COM组件技术与OpenGL控件接口进行软件编程与开发,进一步对所建立的球头立铣刀的各种数学模型进行可视化设计与分析,实现了对球头立铣刀的三维仿真。

短句来源

     The mathematical model for machining hyperboloid gyroidal surfaces with ball-end cutters

     用球头刀加工双曲回转面的数学模型

短句来源

     Processing model of rake and flank faces of ball-end cutters with a virtual axis grinding machine

     虚轴磨床加工球面铣刀的工艺模型

短句来源

     It would be ready for virtual manufacture of ball-end cutters.

     同时它也可为其他类似磨床进行刀具加工或刀具设计的研究提供参考。

短句来源

     It would be ready for virtual manufacture of ball-end cutters.

     同时它也可为其他类似磨床进行刀具加工或刀具设计的研究提供参考。

短句来源

     The mathematical model for machining hyperboloid gyroidal surfaces with ball-end cutters

     用球头刀加工双曲回转面的数学模型

短句来源

     MODELING AND SIMULATION OF MILLING FORCES FOR FLEXIBLE BALL-END MILLING CUTTERS

     考虑刀具变形的球头铣刀铣削力建模与仿真

短句来源

     Study on Geometrical Modeling for Elliptical Edge of Ball-end Milling Cutters

     球头铣刀椭圆形刃口曲线几何模型的研究

短句来源

     Numerical Simulation of Cutting Force Predicting Model for Ball End Milling Cutters

     球头铣刀切削力计算机预报模型的数值仿真

短句来源

查询“ball-end cutters”译词为用户自定义的双语例句
    我想查看译文中含有：的双语例句

为了更好的帮助您理解掌握查询词或其译词在地道英语中的实际用法，我们为您准备了出自英文原文的大量英语例句，供您参考。

  ball-end cutters

This paper presents a set of mathematical models for the design and manufacture of the helical flute and cutting-edge curve of a pair of truncated-cone ball-end cutters.

Manufacturing models for design and NC grinding of truncated-cone ball-end cutters

A precision design and NC manufacturing model for concave-arc ball-end cutters

A Mathematical Model for Manufacturing Ball-End Cutters Using a Two-Axis NC Machine

Interference checking is one of the keys to NC machining.This paper presents a set of algo-rithms satisfactory for gouge free machining.Principles in the developing of CAX system are in-troduced.The algorithm for tool path generation is described,and algorithms for detecting inter-ference between surfaces,in a surface and inter surface boundaries are discussed in detail,basicidea lies in the surface is firstly divided into a great number of triangular facets,and then the dis-tance from the center of ball end...

Interference checking is one of the keys to NC machining.This paper presents a set of algo-rithms satisfactory for gouge free machining.Principles in the developing of CAX system are in-troduced.The algorithm for tool path generation is described,and algorithms for detecting inter-ference between surfaces,in a surface and inter surface boundaries are discussed in detail,basicidea lies in the surface is firstly divided into a great number of triangular facets,and then the dis-tance from the center of ball end cutter to the bounder triangular facets calculated.Operationshows that the algorithms developed are reliable and efficient,and a couple of samples are pre-sented.

干涉检查是数控加工的关键问题之一,本文提供了一套可靠的干涉检查算法。介绍了研制CAX系统的基本原则;说明刀位计算方法;详细讨论曲面间、曲面自身及边界部位的干涉检查算法,其方法均是首先将曲面离散为三角小平面,然后计算球头刀球心至有界三角小平面的距离。该距离即作为判断干涉与否的依据。运行表明,算法可靠,效率较高。附有若干实例。

In engineering practice,some parts mainly consist of convexly sculptured surfaces. Geo-metric errors frequently occur if these parts are machined with ball end-cutter on a 3-axisNC macmne tool.To remedy such a situation,a flat end-cutter is used instead to automati-cally generate the tool path during machining with a method called the point and interpola-tion method.Either rough machining or finish machining can be carried out on a 5-axis and3-axis machine tool with the method proposed.An example...

In engineering practice,some parts mainly consist of convexly sculptured surfaces. Geo-metric errors frequently occur if these parts are machined with ball end-cutter on a 3-axisNC macmne tool.To remedy such a situation,a flat end-cutter is used instead to automati-cally generate the tool path during machining with a method called the point and interpola-tion method.Either rough machining or finish machining can be carried out on a 5-axis and3-axis machine tool with the method proposed.An example of successful realization of auto-matic tool path generation on a computer is given.

提出了一种用平头立铣刀代替球面刀数控加工凸曲面的刀位轨迹自动生成新方法。利用该方法在计算机上成功地实现了刀位轨迹的自动生成。

The new idea that completing the tool-path interpolation for sculptured surfaces intersection machining in CNC system is presented and realized in this paper. The geometric path control ability and performance of this CNC system is greatly enhanced. An interpolation algorithm suitable for ball-end cutter and its machining error estimation as well as its stability analysis are given. Theoretical analysis and practice demonstrate that the algorithm possesses high accuracy and small and stable caculating...

The new idea that completing the tool-path interpolation for sculptured surfaces intersection machining in CNC system is presented and realized in this paper. The geometric path control ability and performance of this CNC system is greatly enhanced. An interpolation algorithm suitable for ball-end cutter and its machining error estimation as well as its stability analysis are given. Theoretical analysis and practice demonstrate that the algorithm possesses high accuracy and small and stable caculating amount.

提出并实现了在ＣＮＣ系统中完成曲面交线加工刀具轨迹直接插补的构想，可极大提高ＣＮＣ系统的几何轨迹控制能力和使用性能．给出了一个适用于球头刀加工的插补算法及其．加工误差估计，证明了算法的稳定性．理论分析和实践表明，该算法精度高、计算量小且稳定．

  本文关键词：基于五轴数控磨床加工的球头立铣刀数学模型及仿真研究，，由笔耕文化传播整理发布。