基于MCGS的电梯运行监控系统的设计

发布时间：2018-01-02 14:18

本文关键词：基于MCGS的电梯运行监控系统的设计　出处：《长春理工大学》2013年硕士论文　论文类型：学位论文

【摘要】：近年来,国内房地产市场异常火爆,电梯使用量迅速增加。针对电梯运行监控和管理的需求,本文研究并设计了基于MCGS组态的电梯运行监控系统。本文以对四层电梯的运行控制为基础,研究电梯运行监控系统的设计与仿真,包括以PLC控制器为核心的控制系统编程,以MCGS组态软件建立制作监控画面,以CC-LINK总线构建群控电梯网络的设计,以变频器为执行器通过控制算法对电梯运行控制的探讨。通过设计研究可实现对四层电梯模型进行组态实时监控,并通过CC-LINK总线通讯方式实现组建网络群控系统,同时控制多个电梯模型的构想,研究PID控制算法以实现变频器控制电机转动,以优化电梯平稳运行曲线。
[Abstract]:In recent years, the domestic real estate market is very hot and the elevator usage is increasing rapidly. According to the demand of elevator operation monitoring and management, this paper studies and designs the elevator operation monitoring system based on MCGS configuration. Based on the operation control of the four-story elevator, this paper studies the design and simulation of the elevator operation monitoring system, including the programming of the control system based on the PLC controller. In this paper, MCGS configuration software is used to build monitor picture, CC-LINK bus is used to design group control elevator network, and inverter is used as executor to discuss elevator operation control. Through the design and research, the configuration real-time monitoring of the four-story elevator model can be realized, and the network group control system can be set up through the CC-LINK bus communication mode, and the concept of controlling multiple elevator models at the same time can be realized. The PID control algorithm is studied to realize the motor rotation controlled by frequency converter and to optimize the steady running curve of elevator.
【学位授予单位】：长春理工大学
【学位级别】：硕士
【学位授予年份】：2013
【分类号】：TU857;TP277

【参考文献】