A公司支承辊轴承技术服务项目风险控制研究

发布时间：2018-03-23 02:30

本文选题：技术服务项目　切入点：项目风险管理　出处：《大连理工大学》2013年硕士论文　论文类型：学位论文

【摘要】：风险控制是技术服务项目管理中的重要环节,通过对项目中的风险进行识别并进行合理有效的预防、控制,从而使其达到预置目标,也是项目建立系统性风险管控的一项核心任务。而将已发生的风险和其影响降至最低则成为项目成功的关键。对于国内大多数钢铁企业来讲,价值服务是舶来品,是新生事物。看似很美,却往往忽略了细节、忽略了风险。不确定性风险广泛存在于价值服务项目中,加之企业缺乏技术服务项目管理经验,这就导致了大批企业在项目实施过程中发生项目失败或干脆中途废止。本文是以通过案例研究为主要方法,针对A钢铁公司4#冷轧线的支承辊轴承技术服务中存在的问题开展针对性研究。首先介绍4#冷轧线支承辊轴承技术服务的特点与内容上,从技术服务项目的阶段构成、阶段识别、项目执行、成本控制等方面挖掘4#冷轧线上主要存在那些风险控制问题,并分析其成因及其可能对项目产生的危害。其次通过项目风险控制分析并参照国内、外技术服务项目现状及风险控制等相关理论的基础上,分析了4#冷轧线支承辊轴承技术服务风险控制问题的主要原因,并得出在该技术服务项目中风险控制不力的主要原因是：风险管控意识淡薄、项目组织与协调缺位、制度僵化、管理方法跟不上、成本管理不完善、人力资源不足和不确定因素等等。最后,从提高项目全员风险管控意识、完善相关制度、建立配套的方法体系、推进项目三位一体的风险管理工作、提高项目全方位协调效率等角度提出4#冷轧线支承辊轴承技术服务风险控制改善策略。
[Abstract]:Risk control is an important link in the management of technical service project. By identifying the risk in the project and carrying out reasonable and effective prevention and control, it can achieve the preset goal. It is also a core task for the project to establish systematic risk management, and minimizing the risks that have occurred and their impact is the key to the success of the project. For most iron and steel enterprises in China, value service is an import and a new thing. It seems beautiful, but it often ignores the details and risks. The uncertainty risk exists widely in the value service project. In addition, the lack of technical service project management experience leads to a large number of enterprises in the process of project implementation project failure or outright abolition. Based on the case study, this paper aims at the problems existing in the back-up roll bearing service of A Steel Company. Firstly, it introduces the characteristics and contents of the bearing technology service of the backing roll bearing in the cold rolling line of the A Steel Company. Those risk control problems are mainly found in the cold rolling line based on the phase composition, phase identification, project execution, cost control, etc., of the technical service project. Secondly, through the analysis of project risk control and referring to the domestic and foreign technical service project status and risk control and other related theories based on the analysis of the causes and possible harm to the project. This paper analyzes the main reasons for the risk control of bearing technology service in the cold rolling line, and concludes that the main reasons for the weak risk control in the technical service project are: weak awareness of risk control, absence of project organization and coordination, and rigid system. Management methods are not up to date, cost management is not perfect, human resources are insufficient and uncertain factors, etc. Finally, from raising the risk control consciousness of the whole project staff, perfecting the related system, establishing the supporting method system, From the point of view of promoting the risk management of the trinity of the project and improving the overall coordination efficiency of the project, this paper puts forward the improving strategy of risk control for the technical service of the bearing in the cold rolling line of the cold rolling line.
【学位授予单位】：大连理工大学
【学位级别】：硕士
【学位授予年份】：2013
【分类号】：F272.3;F426.31

【参考文献】